CADILLAC, CHEVROLET

PIC5523D

2015-02-19 · NHTSA 10114428

목록의 차량은 조사 단서입니다. 제조사 자료에서 엔진, 생산 기간, 소프트웨어 조건을 확인하세요.

제조사 요약

영어 원문

This Preliminary Information communication provides information to the technician about vehicles that may have a no crank with a "Waiting to Initialize" message displayed on the Driver Information Center. Technician may also find a Diagnostic Trouble Code P0AFA in the Hybrid Powertrain Control Module 2. Technician will need to insure that the 12 volt battery is fully charged. Then install the Multiple Diagnostic Interface and open Global Diagnostic System 2 open the Hybrid Powertrain Control Module then use the Control Function feature to select ?Check High Voltage System related Diagnostic Trouble Code?s?. Then click on ?Reset? to clear the Diagnostic Trouble Codes. Wait 45 seconds then exit the screen. Next select Check Secured High Voltage DTCs? select the ?Clear DTCs? then click on ?Reset? to clear the Diagnostic Trouble Codes. Now remove the Multiple Diagnostic Interface from the vehicle then shut the vehicle down and let it sleep for three minutes. At this time disconnect the 12 volt battery and touch the battery cables together and then re-install after 15 seconds. Start the vehicle after a 3 minute waiting period. If the vehicle still has a no crank concern follow published Service Information diagnosis.

제조사, 번호, 발행일, 전체 요약이 같은 등록만 묶고 원래 번호를 보존합니다. 과거 자료도 유지하며 확인된 명시적 후속판만 표시합니다. 1994년 이전 관계는 기본 결과와 분리합니다. 연식 미기재는 모든 연식 적용이 아닙니다.