CHEVROLET

PIT5369A

2015-03-04 · NHTSA 10139316

목록의 차량은 조사 단서입니다. 제조사 자료에서 엔진, 생산 기간, 소프트웨어 조건을 확인하세요.

제조사 요약

영어 원문

This Preliminary Information communication provides information to the technician about vehicles that may have a crank no start issue after sitting overnight below the freezing point. Technician may find Diagnostic Trouble Code U1000. Technician will gain access to the engine harness above the fuel rail. After gaining access to the harness unsecure the harness from the retainers. Now the conduit can be opened to gain access to the wires. Technician will need to find the largest gauge red wire and violate with purple wire in the harness in sure these are the largest gauge wires. After finding the correct wires cut the violate with purple wire near the middle of the wiring that is accessible then cut the red 13mm (.50 inch) longer. Technician will need to strip both violate with purple wires sides and then the top red wire. Do not strip the bottom red wire. After the wires are stripped twist the top red wire and violate with purple wire together. Install a DuraSeal splice sleeve part number 19168447 (Blue) or equivalent to the exposed wires, using the EL-38125-10 splice sleeve crimping tool crimp in the number three nest. Technician will need to gently pull the wires to insure there is a good crimp then heat the splice sleeve with a heat gun to 500 to 700 degrees Fahrenheit. The wires will need to be taped up and placed back in the conduit. Reinstall all the parts that were removed to gain access to the harness and retest.

제조사, 번호, 발행일, 전체 요약이 같은 등록만 묶고 원래 번호를 보존합니다. 과거 자료도 유지하며 확인된 명시적 후속판만 표시합니다. 1994년 이전 관계는 기본 결과와 분리합니다. 연식 미기재는 모든 연식 적용이 아닙니다.