MERCEDES-BENZ, MERCEDES-MAYBACH

LI46.80-P-072750

2022-01-06 · NHTSA 10207196

목록의 차량은 조사 단서입니다. 제조사 자료에서 엔진, 생산 기간, 소프트웨어 조건을 확인하세요.

제조사 요약

영어 원문

Complaint The fault code C112502 is logged (as current or stored) in the rear axle control unit (N68/4). Cause The fault code is caused by communication with the ESP control unit: 1. After carrying out a quick test or performing a diagnosis on the ESP control unit (N30/3): This fault code occurs in the ESP control unit (N30/3) as a result of the diagnosis performed with XENTRY Diagnosis. At the point of diagnosis, the ESP control unit (N30/3) sends the value "ERROR" on the FlexRay. The rear axle steering control unit (N68/4) is not able to process this value and logs the fault code C112502. 2. As a result of a fault code logged in the ESP control unit (N30/3): As a result of the fault code logged in the ESP control unit (N30/3), the ESP control unit (N30/3) sends the value "ERROR" on the FlexRay and the rear axle steering (N68/4) switches to the safe mode provided for this purpose. Remedy Re. cause 1: If fault code C112502 does not occur until after a quick test or after a diagnosis performed directly in the ESP control unit (N30/3), the fault code can be ignored and deleted directly in the rear axle steering control unit (N68/4). If the fault code is current, perform an ignition off/on so that the fault code is only registered as stored. Re. cause 2: If fault code C112502 is already present when the first quick test is carried out, check and process the fault code(s) in the ESP control unit (N30/3). Here too, the fault code can be ignored and deleted directly in the rear axle steering control unit (N68/4).

제조사, 번호, 발행일, 전체 요약이 같은 등록만 묶고 원래 번호를 보존합니다. 과거 자료도 유지하며 확인된 명시적 후속판만 표시합니다. 1994년 이전 관계는 기본 결과와 분리합니다. 연식 미기재는 모든 연식 적용이 아닙니다.