목록의 차량은 조사 단서입니다. 제조사 자료에서 엔진, 생산 기간, 소프트웨어 조건을 확인하세요.
B00A0 ← 이 코드는 무엇을 뜻하나요?22 결과
FORD · 2025-10-01
This article supersedes TSB 23-2280 to update labor times from M-time to fixed time. Some vehicles listed in the Model statement above, may exhibit an illuminated airbag warning indicator with diagnostic trouble codes (DTCs) U3000:41 and/or U3000:54 in the occupant classification system module (OCSM) and/or B00A0:09, B00A0:63, B00A0:64 and/or B00A0:68 in the restraints control module (RCM).
NISSAN · 2024-09-19
DTC B00A0-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. IF YOU CONFIRM DTC B00A0-00 (OCCUPANT DETECTION SENSOR UNIT) is stored, AND OCS zero point reset cannot be performed, (continued on the next page)
INFINITI · 2024-09-19
DTC B00A0-00 STOREIF YOU CONFIRM DTC B00A0-00 (OCCUPANT DETECTION SENSOR UNIT) is stored, AND OCS zero point reset cannot be performed, (continued on the next page)D
MAZDA · 2024-07-05
The following DTCs are missing from the 2024 MX-5 WSM, but you can refer to the 2023 MX-5 for these DTCs to troubleshoot a 2024 model. B00A0:09 B00A0:28 B00A0:4A B00A0:54 B00A0:55 B00A0:81 B00A0:87
FORD · 2023-09-01
Some 2021-2023 F-150 vehicles may exhibit an illuminated airbag indicator light that may be accompanied by diagnostic trouble codes (DTCs) U3000:41 and/or U3000:54 in the occupant classification system module (OCSM) and/or B00A0:09, B00A0:63, B00A0:64 and/or B00A0:68 in the restraints control module (RCM).
NISSAN · 2023-03-09
DTC B00A0-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
INFINITI · 2023-03-09
DTC B00A0-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
MAZDA · 2023-02-28
Some customers may experience the airbag warning light ON with DTC B00A0:09 stored in the SAS control module memory when the battery voltage is low. DTC B00A0:09 (Occupant classification sensor internal signal output unstable). This concern is caused by the low voltage detection time of the occupant classification sensor (OCS) being too short during cranking, which causes detection of the DTC unnecessarily. The concern occurs more often in colder weather when greater electric current is consumed to start the vehicle. To eliminate this concern, the OCS has been modified to avoid unnecessary DTC detection. NOTE: Even if the voltage is recovered after the engine is started, the airbag warning light stays ON during the drive cycle. When the battery voltage becomes stable after the engine is…
NISSAN · 2022-04-26
DTC B00A0-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
INFINITI · 2022-04-26
DTC B00A0-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
MAZDA · 2022-04-26
Some customers may experience the airbag warning light ON with DTC B00A0:09 stored in the SAS control module memory when the battery voltage is low. *DTC B00A0:09 (Occupant classification sensor internal signal output unstable) This concern is caused by the low voltage detection time of the occupant classification sensor (OCS) being too short during cranking, which causes detection of the DTC unnecessarily. The concern occurs more often in colder weather when greater electric current is consumed to start the vehicle. To eliminate this concern, the OCS has been modified to avoid unnecessary DTC detection. NOTE: *Even if the voltage is recovered after the engine is started, the airbag warning light stays ON during the drive cycle. *When the battery voltage becomes stable after the engine is…
MAZDA · 2021-03-25
Some customers may experience the airbag warning light ON with DTC B00A0:09 stored in the SAS control module memory when the battery voltage is low. DTC B00A0:09 (Occupant classification sensor internal signal output unstable). This concern is caused by the low voltage detection time of the occupant classification sensor (OCS) being too short during cranking, which causes detection of the DTC unnecessarily. The concern occurs more often in colder weather when greater electric current is consumed to start the vehicle. To eliminate this concern, the OCS has been modified to avoid unnecessary DTC detection.
NISSAN · 2021-03-05
DTC B00A0-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
INFINITI · 2021-03-05
DTC B00A0-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
MAZDA · 2020-06-10
Some customers may experience the airbag warning light ON with DTC B00A0:09 stored in the SAS control module memory when the battery voltage is low. à ̄‚· DTC B00A0:09 (Occupant classification sensor internal signal output unstable). This concern is caused by the low voltage detection time of the occupant classification sensor (OCS) being too short during cranking, which causes detection of the DTC unnecessarily. The concern occurs more often in colder weather when greater electric current is consumed to start the vehicle. To eliminate this concern, the OCS has been modified to avoid unnecessary DTC detection. NOTE: à ̄‚· Even if the voltage is recovered after the engine is started, the airbag warning light stays ON during the drive cycle. à ̄‚· When the battery voltage becomes…
MAZDA · 2020-04-15
Some customers may experience the airbag warning light ON with DTC B00A0:09 stored in the SAS control module memory when the battery voltage is low. DTC B00A0:09 (Occupant classification sensor internal signal output unstable). This concern is caused by the low voltage detection time of the occupant classification sensor (OCS) being too short during cranking, which causes detection of the DTC unnecessarily. The concern occurs more often in colder weather when greater electric current is consumed to start the vehicle. To eliminate this concern, the OCS has been modified to avoid unnecessary DTC detection. NOTE: Even if the voltage is recovered after the engine is started, the airbag warning light stays ON during the drive cycle. When the battery voltage becomes stable after the engine is…
NISSAN · 2019-09-12
DTC B00A0-00 STORED IF YOU CONFIRM DTC B00A0-00 (OCCUPANT DETECTION SENSOR UNIT) is stored And OCS zero point reset cannot be performed (continued on the next page) And The following screen displays: ACTION 1. Check the Occupant Classification System (OCS) control unit using the ODS Analysis tool software. ï‚· Refer to SERVICE PROCEDURE on page 5. HINT: “OCS” may also be referred to as “ODS”. 2. Perform “75-zero RESET”.
INFINITI · 2019-09-12
DTC B00A0-00 STORED IF YOU CONFIRM DTC B00A0-00 (OCCUPANT DETECTION SENSOR UNIT) is stored And OCS zero point reset cannot be performed And The following screen will display: ACTION 1. Check the Occupant Classification System (OCS) control unit using the ODS Analysis tool software. ï‚· Refer to SERVICE PROCEDURE on the next page. HINT: “OCS” may also be referred to as “ODS”. 2. Perform “75-zero RESET”.
INFINITI · 2015-03-05
INFORMATION PROVIDED FOR REPAIR PROCEDURE FOR B00A0 DTC’S AND DIAGNOSIS. *CN
NISSAN · 2014-10-13
SERVICE INFORMATION If DTC B00A0 (OCCUPANT CLASSIFICATION SYSTEM CONTROL UNIT) is set as current in the Air Bag Diagnosis Sensor Unit: * Follow the "DTC/CIRCUIT DIAGNOSIS" procedure for DTC B1017-B1022 (OCCUPANT SENS C/U) to repair the vehicle. Please see this bulletin for further details.
NISSAN · 2014-10-13
NISSAN: CHECK ELECTRONIC SERVICE MANUAL (ESM) SECTION SRC-SRS AIRBAG CONTROL SYSTEM IF DTC B00A0 (OCCUPANT CLASSIFICATION SYSTEM CONTROL UNIT) IS SET AS CURRENT IN AIR BAG DIAGNOSIS SENSOR UNIT AND FOLLOW PROCEDURE TO REPAIR. MODEL 2015 FRONTIER, XTERRA, ARMADA. *PE
NISSAN · 2014-08-07
IF YOU CONFIRM: The engine will not start (the starter does not operate) AND Any of the following DTCs are found stored: P1650, P1651, B210C Combined with one or more of the following DTCs: B2562, B00A0, B142A, C1601 ACTION: 1) Test the battery with the GR8 Multitasking Battery Diagnostic Station (battery tester/charger). 2) Reprogram the ECM using CONSULT-III plus, and then confirm: The starter operates, the engine starts, and no DTCs stated above are stored after starting the engine. See this bulletin for further detail.