B1096 · 제조사 기술 자료

JEEP · 2014-05-16

Intermittently Front Heated Seats Inoperative This bulletin involves diagnosing and replacing the elements for the front heated seat backs and cushion, if needed. The customer may experience an intermittent condition where one or both front heated seat are inoperative. This condition will only occur when temperatures are below 10F/-12C degrees. When temperatures drop, the resistance values of the heated seat circuits will drop below specification and set DTC, B1092 - Front Left Seat Heater Control Circuit Low and/or B1096 - Front Right Seat Heater Control Circuit Low. Once the vehicle warms up the condition will be gone.

JEEP · 2013-05-08

Part Description: Element Assy - Heated Seat Front Lt and Rt Issue Description: 2013 JK(Wrangler) vehicles built from 2013 Start Of Production 7/23/12 to 1/29/13 with heated seats that become inoperative at cold temperatures below 10 degrees.~ Dealers should NOT replace the Heated Seat Module 68138715AA. Dealers should order a new driver and passenger heated seat back pad to correct this issue when the WiTech indicates Diagnostic Trouble Code (DTC) B1092 or B1096. ~ Both driver and passenger HEATED SEAT BACK PAD parts should be replaced even if only one seat exhibits the issue.~ The repair entails removing the seat back trim cover, cutting off the pigtail of the original element and placing the replacement element part over the original part and making the electrical connection