보기

B1380 · 제조사 기술 자료

목록의 차량은 조사 단서입니다. 제조사 자료에서 엔진, 생산 기간, 소프트웨어 조건을 확인하세요.

B1380 ← 이 코드는 무엇을 뜻하나요?

6 결과

WTY036_TSB_R1 ↗

KIA · 2025-09-05

TECHNICAL SERVICE BULLETIN: WARRANTY EXTENSION CAMPAIGN: SIDE AIRBAG (SAB) INSPECTION AND REPLACEMENT FOR DTC(S) B1380/B1384 (WTY036) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information associated with the ‘Warranty Extension Program’ (WTY036) to diagnose and repair certain airbag warning light 'ON' conditions on 2019-2020MY Optima (JFa) vehicles produced from May 21, 2018 through June 23, 2020. The affected vehicles may exhibit an airbag warning light 'ON' with DTC B1380 and/or B1384 due to the front seat Side Airbag (SAB) connector experiencing higher than normal resistance. The warranty coverage for repairs related to the front seat SAB due to…

WTY036_TSB ↗

KIA · 2024-03-08

TECHNICAL SERVICE BULLETIN: WARRANTY EXTENSION: SIDE AIRBAG (SAB) INSPECTION ANDREPLACEMENT FOR DTC(S) B1380/B1384 (WTY036) - This bulletin provides information associated with the 'Warranty Extension Program' (WTY036) to diagnose and repair certain airbag warning light 'ON' conditions on 2019-2020MY Optima (JFa) vehicles produced from May 21, 2018 through June 23, 2020. The affected vehicles may exhibit an airbag warning light 'ON' with DTC B1380 and/or B1384 due to the front seat Side Airbag (SAB) connector experiencing higher than normal resistance. The warranty coverage for repairs related to the front seat SAB due to illumination of airbag warning light has been extended to 15 years/unlimited miles, starting from the date the vehicle was first put into service.

WTY036_TSB ↗

KIA · 2024-03-08

TECHNICAL SERVICE BULLETIN: SIDE AIRBAG (SAB) INSPECTION AND REPLACEMENT FOR DTC(S) B1380/B1384 (WTY036) - This bulletin provides information associated with the 'Warranty Extension Program' (WTY036) to diagnose and repair certain airbag warning light 'ON' conditions on 2019-2020MY Optima (JFa) vehicles produced from May 21, 2018 through June 23, 2020. The affected vehicles may exhibit an airbag warning light 'ON' with DTC B1380 and/or B1384 due to the front seat Side Airbag (SAB) connector experiencing higher than normal resistance. The warranty coverage for repairs related to the front seat SAB due to illumination of the airbag warning light has been extended to 15 years / unlimited miles, starting from the date the vehicle was first put into service.

SSM 47235 ↗

FORD, LINCOLN · 2018-04-13

Some 2016 Edge/MKX vehicles may exhibit an illuminated adaptive/active steering fault message in the instrument panel cluster (IPC) message center with diagnostic trouble codes (DTCs) U3000, C2003, B137F, B1380, U210A, and U2000 stored in the SECM. If these DTCs are present, replace the SECM. Use causal part 3600 and applicable labor operations in section 10 of the Service Labor Time Standards (SLTS) Manual.

SSM 46171 ↗

FORD, LINCOLN · 2016-11-02

SOME 2016 EDGE/MKX VEHICLES MAY EXHIBIT AN ILLUMINATED ADAPTIVE/ACTIVE STEERING FAULT MESSAGE IN THE INSTRUMENT PANEL CLUSTER (IPC) MESSAGE CENTER WITH DIAGNOSTIC TROUBLE CODES (DTCS) U3000, C2003, B137F, B1380, U210A, AND U2000 STORED IN THE SECM. IF DTC U3000:96 IS PRESENT, THE SECM MUST BE REPLACED. IF DTC U3000:96 IS NOT PRESENT, REPROGRAM THE SECM TO THE LATEST CALIBRATION USING INTEGRATED DIAGNOSTIC SYSTEM (IDS) RELEASE 102.05 OR HIGHER. MAKE SURE YOU ARE CONNECTED TO THE INTERNET WHEN ENTERING MODULE PROGRAMMING TO OBTAIN THE LATEST UPDATES. CALIBRATION FILES MAY ALSO BE OBTAINED AT WWW.MOTORCRAFTSERVICE.COM. USE CAUSAL PART 3600 AND APPLICABLE LABOR OPERATIONS IN SECTION 10 OF THE SERVICE LABOR TIME STANDARDS (SLTS) MANUAL.

PIC5710A ↗

CHEVROLET · 2013-03-19

This Preliminary Information communication provides information to the technician about vehicles that have a no crank. Technician will find Diagnostic Trouble Code B1380. Technician will need to check for aftermarket part installed into the vehicle. Technician should check all the power mode voltages with the ignition switch installed. If no after-market electrical devices are found and the power modes are incorrect, replace the ignition switch.