B2000 · 제조사 기술 자료

AUDI · 2025-07-01

This TSB provides informaiton when the Audi virtual cockpit is black, or the message "Instrument cluster: fault" is displayed; DTC B200049 - Control Module faulty.

AUDI · 2025-06-26

This bulletin provides information when the message "Parking systems: fault" is displayed and DTC B200044 is stored.

AUDI · 2025-06-13

This bulletin provides information when, with ConBox High, the Emergency call (SOS) fault/LED is red, with DTC B200000.

BENTLEY · 2025-06-05

OBC Charging Efficiency MIL SW Update (NAR Only) | Bentayga (Hybrid) | 25MY. A Software update is required for Plug-in Hybrid vehicles built prior to BIL 7.1 This update must be applied to update the vehicles on board charger (OBC). Diagnostic address (00C6). The update resolves the potential triggering of the following fault: • "Control unit defective" error 0x100200 low_power_efficiency (TI=B200000) is registered in the OBC. Repeated occurrences of the identified error will result in MiL illumination.

BENTLEY · 2025-06-05

OBC Charging Efficiency MIL SW Update (NAR Only) | Bentayga (Hybrid) | 24MY. A Software update is required for Plug-in Hybrid vehicles built prior to BIL 5.5 This update must be applied to update the vehicles on board charger (OBC). Diagnostic address (00C6). The update resolves the potential triggering of the following fault: • "Control unit defective" error 0x100200 low_power_efficiency (TI=B200000) is registered in the OBC. Repeated occurrences of the identified error will result in MiL illumination.

BENTLEY · 2025-06-05

OBC Charging Efficiency MIL HW/SW Update (NAR Only) | Bentayga (Hybrid) | 24MY, A Software update and gateway hardware change are required for Plug-in Hybrid vehicles built prior to BIL 5.5 This update must be applied to update the vehicles on board charger (OBC). Diagnostic address (00C6). The update resolves the potential triggering of the following fault: • "Control unit defective" error 0x100200 low_power_efficiency (TI=B200000) is registered in the OBC. Repeated occurrences of the identified error will result in MiL illumination.

AUDI · 2025-06-03

This bulletin provides information when thre is a warning in the instrument cluster: "Instrument cluster: fault. Limited warning messages. Please contact workshop"; B200096.

AUDI · 2025-04-14

This TSB provides information when there is an eCall fault/eCall LED is red with DTC B200000.

PORSCHE · 2025-04-08

Technical information for a Yellow Warning Message "Power Steering Faulty - Adapted Driving Permitted" in Conjunction with Fault Memory Entry "B200000" in the Power Steering Control Unit. 911 GTS and Targa GTS included.

AUDI · 2025-03-17

This TSB provides information when the yellow steering warning lamp lights up when engine is started; DTCs B200000, B200FF4.

AUDI · 2025-02-25

This TSB provides information when there is an eCall fault/eCall LED is red with DTC B200000.

BENTLEY · 2025-02-25

Warnings within the DIP for the rear steering system - DTC B200096 and/or P060700 evident within diagnostic address 00CB. Customer statement: • Rear Steering Fault warning present within the DIP.

AUDI · 2025-02-14

This bulletin provides information when there is a "Parking systems: fault" message, DTC: B200044 stored in DA 0009.

PORSCHE · 2025-01-28

Technical Information - Warning Message "Power Steering Failed- Increased Force Requirement" / Fault Memory Entry "B200046-Functional Restriction" in the Power Steering Control Unit (242/24)

AUDI · 2024-12-17

This bulletin provides information when there is an instrument cluster fault, or a black screen when started (DTC B200049 symptom code 10485833).

AUDI · 2024-12-13

This bulletin provides information when the DTC B200000 is stored in C006.

AUDI · 2024-12-04

This TSB provides information when the yellow steering warning lamp lights up when engine is started; DTCs B200000, B200FF4.

AUDI · 2024-10-28

An erroneous warning message may appear in the instrument cluster due to overly sensitive diagnostic software. The message is accompanied by a fault stored in the control unit for high-voltage battery charging, which also prevents charging at 100% with a 110V cable. A software update will be performed to address this issue.Updated claiming instructions Included Appendix A with updated B200000 fault clearing instructions

AUDI · 2024-10-28

An erroneous warning message may appear in the instrument cluster due to overly sensitive diagnostic software. The message is accompanied by a fault stored in the control unit for high-voltage battery charging, which also prevents charging at 100% with a 110V cable. A software update will be performed to address this issue.Updated claiming instructions Included Appendix A with updated B200000 fault clearing instructions

AUDI · 2024-09-10

This bulletin provides service information when the message "Electrical system: fault" appears in the instrument cluster; event memory entry B200094 (00C4) is stored.

BENTLEY · 2024-09-05

DTC B200000 with symptom code 1049088 evident in the high voltage battery charger control module (Diagnostic address C6).

AUDI · 2024-08-30

This bulletin provides information when there is an eCall fault / the eCall LED is red with DTC B200000.

AUDI · 2024-07-31

This bulletihn provides information when various ghost DTCs, B200000, P0CA400, P33E300, U15BF00 and/or U112100 are stored in the HV battery charger ECU.

AUDI · 2024-07-27

This bulletin provides information when the message "Engine start system: Fault or "Power unit start system fault is displayed in the instrument cluster. DTC B200047.

AUDI · 2024-07-18

This bulletin provides information when the ecall LED is red/ecall Fault, with DTC B200000.

AUDI · 2024-07-01

This Pending Service Solution (PSS) requests that technicains enter a record in the PSS Database in instances where there is an HV Charger warninga message aon the instrument cluster; DTC B200000 in 00C6.

AUDI · 2024-06-28

This bulletin provides information when there is an eCall fault/eCall LED red with DTC B200000 in vehicles with ConBox High.

BENTLEY · 2024-06-25

DTC B2000F2: Faulty control module (Symptom code 4102) and/or night vision warning light evident within the (DIP). Customer statement: Night vision warning lamp (Figure 1) is evident with the Drivers Information Panel (DIP). Workshop findings: DTC - B2000F2: Faulty control module (Symptom code 4102) evident within address 0084 - Night vision control module.

AUDI · 2024-06-21

This Pending Service Solution (PSS) requests that technicians enter a record in the PSS database in instances when a warning message appears in the instrument cluster along with DTC B200000 in 00C6.

AUDI · 2024-06-05

This bulletin provdies information when the Virtual Cockpit display is blank; DTC B200049, Symptom code 10485833.