C1131 · 제조사 기술 자료

AUDI · 2025-07-22

This TSB provides infrormation when DTC C113107 and/or C113207 is stored in 00BA.

BENTLEY · 2022-05-03

Engine vibration/humming at idle - Active engine mount diagnosis guidelines. Customer statement: Engine vibration/humming noise at idle Workshop findings DTC C113111 - 307 - Actuator 1 for assembly mounting Short circuit to Ground (GND) evident within the engine mounting control module - Diagnostic address 00BA Technical background In the event the issue is as described, refer to the Measure section of this TPI.

BENTLEY · 2021-05-12

Static DTCs C113107 and or C113207 evident within Diagnostic address 00BA. Customer statement / workshop findings The following Static DTCs are evident following the fitment of replacement Active engine mounts and/or the Active Engine mount control unit (00BA) with the part number 4M0907145E with SW 0132 (often as result of TPI 2060418/-) C113107: Actuator 1 for assembly mounting mechanical malfunction Symptom Code 784 And/or C113207: Actuator 2 for assembly mounting mechanical malfunction Symptom Code 785 Technical background Refer to the Measure section of this TPI

LAND ROVER · 2018-05-16

Issue: Customer reports warning lamp illuminates combined with a message stating that only normal height is available. When interrogated with diagnostic equipment the following fault codes may be present: C1A20-64, C1131-92

LAND ROVER · 2017-09-12

Issue: Customer reports warning lamp illuminates combined with a message stating that only normal height is available. When interrogated with diagnostic equipment the following fault codes may be present: C1A20-64, C1131-92