AUDI · 2026-01-09
This Reporting Obligation requests that techicains contact the Technical Assistance Center prior to repair when there is an on-board power system fault in cluster P000000 in the 008C.
P0000 · 제조사 기술 자료
목록의 차량은 조사 단서입니다. 제조사 자료에서 엔진, 생산 기간, 소프트웨어 조건을 확인하세요.
P0000 ← 이 코드는 무엇을 뜻하나요?30 결과
AUDI · 2025-12-09
This Reporting Obligation requests that techicains contact the Technical Assistance Center prior to repair when there is an on-board power system fault in cluster P000000 in the 008C.
AUDI · 2025-11-11
This bulletin provides information when there is a communication with the airbag control unit (J34)/field campaign 68I2 fails; DTC P000000.
AUDI · 2024-09-06
This bulletin provides information when the DTC U12B800 or P000000 is stored in the suspension control module.
AUDI · 2023-12-01
This bulletin provides information when the exhaust warning light is illuminated; engine starter relay test plan DTC P000000.
AUDI · 2023-11-01
This bulletin provides information for when there is an exhaust warning light; DTC P000000 engine starter relay test plan.
AUDI · 2023-10-24
This bulletin provides information for when air bag control module test plans are not completing; DTCs B130455, B130555, B159B00, and P000000.
AUDI · 2023-05-25
This bulletin states that if the DTC U12B800 and DTC P000000 with symptom code 1541739 is stored in the suspension control module J775, no repairs are needed.
AUDI · 2023-02-20
This bulletin provides information to address the message "Switch off the engine and check coolant" with the DTC P000000
HARLEY-DAVIDSON · 2022-08-02
SERVICE BULLETIN M1559: REVOLUTION MAX ECM UPDATE. PURPOSE: This bulletin informs dealers that Harley-Davidson has an Electronic Control Module (ECM) update that is available on Digital Technician II (DT II). This update is to address Diagnostic Trouble Code (DTC) P000000 setting and putting the bike into the fast idle position (4,000 rpm). The update also addresses the concern of an inadvertent tripping of P227900 for the intake air leak under certain riding conditions when no intake leak is present.
AUDI · 2022-06-09
This bulletin contains instructions for when DTC U12B800 or P000000 is stored in the suspension control module.
FORD · 2022-03-01
Some 2018-2020 F-150, 2017-2022 F-Super Duty and 2016-2022 F-650/F-750 vehicles equipped with a diesel engine may exhibit diagnostic trouble code (DTC) P0000 stored in the powertrain control module (PCM) after an on-demand self test. This DTC is due to a processing error in the PCM as a result of on-demand self testing. P0000 is an invalid DTC that will not illuminate the malfunction indicator lamp (MIL) and no repairs should be performed.
AUDI · 2021-08-02
This bulletin contains instructions for when DTC U12B800 or P000000 is stored in the suspension control module.
JEEP · 2021-05-05
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) have been set: P1D7F - ETC Self-Learning Failure. P1524 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled. P0000-00 - Will be displayed in the scan tool, but should really be displaying P0326-00 (Knock Sensor 1 Circuit Performance). In addition, the customer may notice the following condition:After a short trip and shutting the engine off for 5-10 minutes, vehicle exhibits a long crank/start condition(EMEA only). Hard start condition caused by spark plugs…
JEEP · 2021-05-05
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) have been set: P1D7F - ETC Self-Learning Failure. P1524 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled. P0000-00 - Will be displayed in the scan tool, but should really be displaying P0326-00 (Knock Sensor 1 Circuit Performance). In addition, the customer may notice the following condition:After a short trip and shutting the engine off for 5-10 minutes, vehicle exhibits a long crank/start condition(EMEA only). Hard start condition caused by spark plugs…
AUDI · 2020-10-07
This bulletin contains instructions for replacing a part or performing a software update for DTC P000000.
AUDI · 2020-07-24
This bulletin contains instructions for replacing a part or performing a software update for DTC P000000.
AUDI · 2020-03-18
This bulletin contains instructions for replacing a part or performing a software update for DTC P000000.
AUDI · 2020-02-21
This bulletin contains instructions for when DTC U12B800 or P000000 is stored in the suspension control module.
FIAT · 2017-09-26
Flash: Powertrain Diagnostic and System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one of the following DTCs have been set:P1D7F - ETC (Electronic Throttle Control) Self-Learning Failure. P1524 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled. P0000-00 - Will be displayed in the scan tool, but should really be displaying P0326-00 (Knock Sensor 1 Circuit Performance). In addition, the customer may notice the following condition:Hard start condition, caused by spark plugs fouling.
JEEP · 2017-09-21
Flash: Powertrain Diagnostic and System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one of the following DTCs have been set:P1D7F - ETC Self-Learning Failure. P1524 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled. P0000-00 - Will be displayed in the scan tool, but should really be displaying P0326-00 (Knock Sensor 1 Circuit Performance). In addition, the customer may notice the following condition:Hard start condition caused by spark plugs fouling.
FIAT · 2017-09-19
Flash: Powertrain Diagnostic and System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Codes (DTCs) have been set:P1D7F-00 - ETC Self-Learning Failure. P0000-00 - Will be displayed but should really be displaying P0326-00 (Knock Sensor 1 Circuit Performance).
FIAT · 2017-09-15
Flash: Powertrain Diagnostic and System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following DTCs have been set:P1D7F-00 - ETC Self-Learning Failure. P0141-00 - O2 Sensor 1/2 Heater Performance. P1523-00 - VVA Low Oil Pressure. 1524-00 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled. P0000-00 - will be displayed but should really be displaying P0326-00 (Knock Sensor 1 Circuit Performance).
FIAT · 2017-06-27
Flash: Powertrain Diagnostic and System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Code (DTC) has been set:P0000-00 - Will be displayed but should really be displaying P0326-00 (Knock Sensor 1 Circuit Performance). The customer may notice one of the following condition(s):Incorrect ambient temperature readings on the Instrument Panel Cluster (IPC). Engine knock issues. In addition, the following software enhancement is also available:4-3 and 3-2 downshift improvements.
FIAT · 2017-06-16
Flash: Diagnostic and System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Code (DTC) has been set:P0000-00 - Will be displayed but should really be displaying P0326-00 (Knock Sensor 1 Circuit Performance). The customer may notice one of the following condition(s):Incorrect ambient temperature readings on the Instrument Panel Cluster (IPC). Engine knock issues. In addition, the following software enhancement is also available:4-3 and 3-2 downshift improvements.
FIAT · 2017-03-03
Flash: Diagnostic And System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following DTCs have been set: P0141-00 - O2 Sensor 1/2 Heater Performance. P1523-00 - VVA Low Oil Pressure. 1524-00 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled. P0000-00 - will be displayed but should really be displaying P0326-00 (Knock Sensor 1 Circuit Performance).
FORD · 2017-02-27
SOME 2017 F-SUPER DUTY AND 2016-2017 F-650/F-750 VEHICLES EQUIPPED WITH A 6.7L ENGINE MAY EXHIBIT A DTC P0000. THIS DTC IS DUE TO A PROCESSING ERROR IN THE POWERTRAIN CONTROL MODULE (PCM) AS A RESULT OF ON DEMAND SELF TESTING WITH AN INTEGRATED DIAGNOSTIC SYSTEM (IDS). P0000 IS AN INVALID DTC THAT WILL NOT ILLUMINATE THE MIL AND SHOULD BE DISREGARDED.
FIAT · 2016-11-15
Flash: Diagnostic And System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with new software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Code (DTC) has been set. P0000-00 - will be displayed in the scan tool, but should really be displaying P0326-00 (Knock Sensor 1 Circuit Performance).
JEEP · 2016-11-15
Flash: Powertrain Diagnostic And System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with new software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Code (DTC) has been set: P0000-00 - will be displayed in the scan tool, but should really be displaying P0326-00 (Knock Sensor 1 Circuit Performance).
FIAT · 2016-11-04
Flash: Diagnostic And System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Code (DTC) has been set: P0000-00 - will be displayed but should really be displaying P0326-00 (Knock Sensor 1 Circuit Performance).