목록의 차량은 조사 단서입니다. 제조사 자료에서 엔진, 생산 기간, 소프트웨어 조건을 확인하세요.
P0369 ← 이 코드는 무엇을 뜻하나요?35 결과
HONDA · 2025-03-04
Service Bulletin - The MIL comes on with DTC P0369, Camshaft Position (CMP) EX-VTC actuator interruption due to the PCM software at start-up determining the EX-VTC actuator operation as noise of the EX-CMP sensor B, causing MIL to turn on and set DTC P0369.
FORD · 2021-10-29
Some 2020-2021 Escape vehicles may exhibit various symptoms due to a loss of voltage reference (VREF) from the 14290 harness above the steering shaft u-joint. Possible symptoms may include an illuminated malfunction indicator lamp (MIL),runs rough, fuse 44 open and may or may not set DTCs P06A7, P0840, P0842, P0845, P0847, P2122, P2127, P0522, P008A, P06A6, P2196, P0192, P0369, P0212, P0340, P0344, P0365, P0532,P0504, P07E4, P06E9, P0369, C175E, C175B, C2302, and/or C0040. Inspect the 14290 harness directly above the steering shaft u-joint near the upper brake pedal mount that may come in contact with the steering shaft. Rotation of the steering wheel may cause the short circuit. If damage is found, repair as necessary and move the harness away from the steering shaft U-joint area and…
FORD · 2021-09-14
Some 2020-2021 Escape vehicles may exhibit a loss of voltage reference (VREF) or runs rough, blow fuse 44 and may or may not set DTC's P06A7,P0840,P0842,P0845,P0847,P2122,P2127,P0522,P008A,P06A6,P2196,P0192, P0212,P0340,P0344,P0365,P0532,P06E9,P0369,C175E,C175B,C2302,P0369. The 14290 harness directly above the steering shaft u-joint near the upper brake pedal mount may come in contact with the steering shaft. Rotation of the steering wheel will trigger the short circuit. Inspect the harness for damage at that location and repair as necessary. If damage was found, move the harness away from the steering shaft U-joint area and secure the harness. Refer to Wiring Diagram Cell 005.
FORD · 2021-09-10
Some 2020 Mustang vehicles equipped with a 5.0L engine built on 01-Sep-2020 and through 01-Dec-2020 may experience an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0369 in the powertrain control module (PCM). This may be due to a flatness concern on the mega cap on the right hand cylinder head. To correct the condition, replace the right-hand cylinder head. Refer to Workshop Manual (WSM), Section 303-01B > Removal and installation > Cylinder Head RH. For claiming, use causal part 6049 and applicable labor times in Section 06 of the Service Labor Time Standards (SLTS) Manual.
FORD, LINCOLN · 2020-12-15
Some 2018-2020 F-150/Navigator vehicles equipped with a 3.5L EcoBoost High-Output engine and built on or before 11-Sept-2020 may exhibit excessive oil consumption with no visible oil leaks with or without diagnostic trouble code (DTC) P0365 and/or P0369. To correct the condition, follow the Service Procedure steps to reprogram the powertrain control module (PCM) and if necessary, replace the engine valve covers.
JEEP · 2020-10-28
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with thelatest available software. The customer may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find oneor more of the following Diagnostic Trouble Codes (DTCs).P0369 - Camshaft Position Sensor Intermittent - Bank 1 Sensor 2. P0335 - Crankshaft Position Sensor Circuit. P0339 - Crankshaft Position Sensor Intermittent. P0344 - Camshaft Position Sensor Intermittent. P0390 - Camshaft Position Sensor Circuit - Bank 2 Sensor 2. P0340 - Camshaft Position Sensor Circuit - Bank 1 Sensor 1. P0365 - Camshaft Position Sensor Circuit - Bank 1 Sensor 2. P0345 - Camshaft Position Sensor Circuit - Bank 2 Sensor 1. P0349 -…
JEEP · 2020-10-28
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with thelatest available software. The customer may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs).P0369 - Camshaft Position Sensor Intermittent - Bank 1 Sensor 2. P0335 - Crankshaft Position Sensor Circuit. P0339 - Crankshaft Position Sensor Intermittent. P0344 - Camshaft Position Sensor Intermittent. P0390 - Camshaft Position Sensor Circuit - Bank 2 Sensor 2. P0340 - Camshaft Position Sensor Circuit - Bank 1 Sensor 1. P0365 - Camshaft Position Sensor Circuit - Bank 1 Sensor 2. P0345 - Camshaft Position Sensor Circuit - Bank 2 Sensor 1. P0349 -…
LINCOLN · 2020-09-30
Some 2018-2020 Navigator vehicles may exhibit excessive oil consumption with no visible oil leaks with or without diagnostic trouble code (DTC) P0365 and/or P0369. Engineering is working to implement a PCM calibration update for this condition. In the interim, clear the DTCs with the appropriate Ford scan tool, top off the oil to the top of the 'full range' on the dipstick and schedule a follow-up appointment with the customer for late November 2020. Advise the customer that a repair is expected to be available in November and remind customers to follow the Owner's Manual to check oil level. Dealers are requested to contact all customers that were previously scheduled to have this service performed in September and reschedule for late November.
LINCOLN · 2020-09-24
Some 2018-2020 Navigator vehicles may exhibit excessive oil consumption with no visible oil leaks with or without diagnostic trouble code (DTC) P0365 and/or P0369. Engineering is working to implement a PCM calibration update for this condition. In the interim, clear the DTCs with the appropriate Ford scan tool, top off the oil to the top of the 'full range' on the dipstick and schedule a follow-up appointment with the customer for late September 2020. Advise the customer that a repair is expected to be available in September and remind customers to follow the Owner's Manual to check oil level. Dealers are requested to contact all customers that were previously scheduled to have this service performed in July and reschedule for late November.
FORD · 2020-08-28
This article supersedes TSB 20-2162 to update the Labor Operations descriptions. Some 2018-2020 F-150 Raptor and 2019-2020 F-150 Limited vehicles equipped with a 3.5L EcoBoost High-Output engine may exhibit excessive oil consumption with no visible oil leaks with or without diagnostic trouble code (DTC) P0365 and/or P0369. To correct the condition, follow the Service Procedure steps to reprogram the powertrain control module (PCM), and for vehicles built on or before 1-Apr-2019 that have not previously had both valve covers replaced perform an oil consumption test.
LINCOLN · 2020-07-31
Some 2018-2020 Navigator vehicles may exhibit excessive oil consumption with no visible oil leaks with or without diagnostic trouble code (DTC) P0365 and/or P0369. Engineering is working to implement a PCM calibration update for this condition. In the interim, clear the DTCs with the appropriate Ford scan tool, top off the oil to the top of the full range on the dipstick and schedule a follow-up appointment with the customer for late September 2020. Advise the customer that a repair is expected to be available in September and remind customers to follow the Owner's Manual to check oil level. Dealers are requested to contact all customers that were previously scheduled to have this service performed in July and reschedule for late September.
DODGE, JEEP · 2020-05-27
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following DTCs have been set:P06EF - Engine Restart Performance(3.0L and 3.6L Only). P0556 - Brake Booster Pressure Sensor Circuit Performance. P040B - Exhaust Gas Recirculation Temperature Sensor 1 Circuit Performance(3.6L Only). U1424 - Implausible Engine Torque Signal Received(2017 MY Only). P2681 - Engine Coolant Bypass Valve Control Circuit Open(3.6L Only). P2299 - Brake Pedal Position/Accelerator Pedal Position Incompatible. B23C3 - Stop/Start Disable Switch 1/2 Correlation(3.0L and 3.6L Only). The following DTCs…
FORD · 2020-05-11
Some 2018-2020 F-150 Raptor and 2019-2020 F-150 Limited vehicles equipped with a 3.5L EcoBoost High-Output engine may exhibit excessive oil consumption with no visible oil leaks with or without diagnostic trouble code (DTC) P0365 and/or P0369. To correct the condition, follow the Service Procedure steps to reprogram the powertrain control module (PCM), and for vehicles built on or before 1-Apr-2019 that have not previously had both valve covers replaced perform an oil consumption test.
FORD · 2020-05-11
This article supersedes TSB 19-2232 to update the vehicles affected. Some 2017-2019 F-150 and 2018-2019 Expedition vehicles built on or before 1-Apr-2019 and equipped with a 3.5L EcoBoost engine may exhibit excessive oil consumption with no visible oil leaks with or without diagnostic trouble code (DTC) P0365 and/or P0369. This may be due to a concern with the positive crankcase ventilation (PCV) system. To correct the condition, follow the Service Procedure steps to verify the condition and replace the valve covers.
LINCOLN · 2020-05-08
Some 2018-2020 Navigator vehicles may exhibit excessive oil consumption with no visible oil leaks with or without diagnostic trouble code (DTC) P0365 and/or P0369. Engineering is working to implement a PCM calibration update for this condition. In the interim, clear the DTCs with the appropriate Ford scan tool, top off the oil to the top of the full range on the dipstick and schedule a follow-up appointment with the customer for late July 2020. Advise the customer that a repair is expected to be available in July and remind customers to follow the Owner's Manual to check oil level.
FORD, LINCOLN · 2019-07-25
Some 2017-2019 F-150 and 2018-2019 Expedition/Navigator vehicles built on or before 1-Apr-2019 and equipped with a 3.5L EcoBoost engine may exhibit excessive oil consumption with no visible oil leaks with or without diagnostic trouble code (DTC) P0365 and/or P0369. This may be due to a concern with the positive crankcase ventilation (PCV) system. To correct the condition, follow the Service Procedure steps to verify the condition and replace the valve covers.
FORD, LINCOLN · 2019-05-14
Some 2017-2019 F-150 and 2018-2019 Expedition/Navigator vehicles equipped with a 3.5L EcoBoost engine built on or before 1-Apr-2019 may exhibit excessive oil consumption with or without diagnostic trouble code (DTC) P0365 and/or P0369. If there are no visible external oil leaks, replace both valve covers. Refer to Workshop Manual, Section 303-01. For claiming, use causal part 6582 and applicable labor operations in Section 6 of the Service Labor Time Standards (SLTS) Manual.
CHRYSLER · 2019-05-04
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. A customer or technicians may be unable to read data information from the OBDII connector when using a generic scan tool (APAC).Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, a technician may find the following DTCs have been set (NAFTA):U0418 - Implausible Data Received From Brake System Control Module 1. U0432 - Invalid Data Received From Multi-Axis Acceleration Sensor Module. P06EF - Engine Restart Performance. P06E9 - Engine Starter Performance. P00FD - Battery -B- State Of Charge Performance. C2222-68 - Improper Powerdown - Event Information. P0607-00 - ECU Internal Performance - ESM. U0402-00 -…
FORD · 2019-05-01
Some 2018-2019 F150, Expedition, and Navigator vehicles equipped with a 3.5L EcoBoost engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0365 and/or P0369 stored in the powertrain control module (PCM). This may be due to low engine oil level, low engine oil pressure, or worn/damaged variable camshaft timing (VCT) units. Before performing Powertrain Control and Emissions Diagnosis (PC/ED) Manual diagnostics, inspect the engine oil level and evaluate any abnormal VCT noise conditions. If engine oil level is correct and no unusual engine noises are present, proceed with normal diagnostics per PC/ED pinpoint test (PPT) DR.
FORD, LINCOLN · 2018-10-29
Some 2017-2018 F-150 and 2018 Expedition/Navigator vehicles equipped with a 3.5L EcoBoost and built on or before 13-Jul-2018 may exhibit diagnostic trouble code (DTC) P0365 and/or P0369 with excessive oil consumption. If there are no visible external oil leaks, replace both engine valve covers. Refer to Workshop Manual, Section 303-01. For claiming, use causal part 6582 and applicable labor operations in Section 6 of the Service Labor Time Standards (SLTS) Manual.
FORD · 2018-09-20
Some 2017-2018 F-150 and 2018 Navigator vehicles equipped with a 3.5L EcoBoost and built on or before 13-Jul-2018 may exhibit diagnostic trouble code (DTC) P0365 and/or P0369 with excessive oil consumption. If there are no visible external oil leaks, replace both engine valve covers. Refer to Workshop Manual, Section 303-01. For claiming, use causal part 6582 and applicable labor operations in Section 6 of the Service Labor Time Standards (SLTS) Manual.
FORD · 2018-06-20
Some 2018 F150, Navigator and Expedition vehicles equipped with 3.5L EcoBoost engine may experience malfunction indicator lamp (MIL) illumination with Diagnostic Trouble Code(s) DTC P0365 and/or P0369. This may be due to low engine oil level, low engine oil pressure or damaged variable camshaft timing (VCT) phasers. Before performing Powertrain Control and Emissions Diagnostics (PC/ED) Manual diagnostics, inspect the engine oil level and evaluate any abnormal VCT noise conditions. If engine oil level is correct, and no unusual engine noises are present, proceed with normal PC/ED diagnostics test PPT 'DR'.
FORD · 2018-02-20
Some 2012-2014 Focus vehicles equipped with a 2.0L gasoline direct injection (GDI) engine may exhibit concerns of engine runs rough, crank no-start, loss of power, loss of engine RPM, and/or illuminated MIL with diagnostic trouble codes (DTCs) P0122, P0222, P0320, P0322, P0327, P0332, P0344, P0369, P06A7, P060D, P061C, P1336, P1674, P2111, P2112, P2127 and/or P2135. Follow the Service Procedure steps to correct the condition.
ACURA · 2018-01-10
Servicenews article - We?re getting reports of reduced engine power with the MIL on. Service techs are seeing DTC P0369 (CMP sensor circuit intermittent interruption) and signs of excessive camshaft end play.
HONDA · 2018-01-10
Servicenews article - We?re getting reports of reduced engine power with the MIL on. Service techs are seeing DTC P0369 (CMP sensor circuit intermittent interruption) and signs of excessive camshaft end play.
DODGE, JEEP · 2017-09-23
Flash: Powertrain Diagnostic and System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one of the following DTCs have been set:P0556 - Brake Booster Pressure Sensor Circuit Performance. P040B - Exhaust Gas Recirculation Temperature Sensor 1 Circuit Performance(3.6L Only). U1424 - Implausible Engine Torque Signal Received(2017 MY Only). P2681 - Engine Coolant Bypass Valve Control Circuit Open(3.6L Only). P2299-00 - Brake Pedal Position/Accelerator Pedal Position Incompatible. B23C3 - Stop/Start Disable Switch 1/2 Correlation(3.0L and 3.6L Only). The following DTCs have been changed from a one…
DODGE, JEEP · 2017-08-29
Flash: Powertrain Diagnostic and System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one of the following DTCs have been set:P040B - Exhaust Gas Recirculation Temperature Sensor 1 Circuit Performance(2017 MY with a 3.6L Only). U1424 - Implausible Engine Torque Signal Received(2017 MY Only). P2681 - Engine Coolant Bypass Valve Control Circuit Open(3.6L Only). P2299-00 - Brake Pedal Position/Accelerator Pedal Position Incompatible. B23C3 - Stop/Start Disable Switch 1/2 Correlation(3.0L and 3.6L Only). The following DTCs have been changed from a one trip fault to a two trip fault for(3.0L and…
ACURA · 2017-08-23
Tech line summary article - We're getting reports of reduced engine power with the MIL on. Service techs are seeing DTC P0369 (CMP sensor circuit intermittent interruption) and signs of excessive camshaft end play.
HONDA · 2017-08-23
Tech line summary article - We're getting reports of reduced engine power with the MIL on. Service techs are seeing DTC P0369 (CMP sensor circuit intermittent interruption) and signs of excessive camshaft end play.
CHRYSLER · 2017-08-09
Flash: Powertrain Diagnostic and System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with thelatest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, a technician may find the following DiagnosticTrouble Codes (DTCs) have been set:U1400-00 - Implausible TPS Signal Received P1D73 - AGS Performance -(Active Grill Shutter). P0171 - Fuel System 1/1 Lean. P0174 - Fuel System 2/1 Lean. The following Diagnostic Trouble Codes (DTCs) have been changed from a one trip fault to atwo trip fault:P0335 - Crankshaft Position Sensor Circuit. P0339 - Crankshaft Position Sensor Intermittent. P0340 - Camshaft Position Sensor Circuit - Bank 1 Sensor 1. P0344 - Camshaft Position Sensor Intermittent…