목록의 차량은 조사 단서입니다. 제조사 자료에서 엔진, 생산 기간, 소프트웨어 조건을 확인하세요.
P0502 ← 이 코드는 무엇을 뜻하나요?10 결과
CHEVROLET, GMC, HUMMER · 2018-12-20
This Preliminary Information communication provides information to the technician about vehicles the have a Service Engine Soon Malfunction Indicator Lamp on and or engine running rough. Technician may find Diagnostic Trouble Codes P0106, P0107, P0171, P0300, P0502, P1107, and P2431. Technician will need to inspect all Manifold Absolute Pressure sensor circuits for being broken inside of the insulation near the Manifold Absolute Pressure sensor connector.
CADILLAC, CHEVROLET · 2015-12-18
ome customers may comment on a malfunction indicator lamp (MIL) illuminated. They may also comment that they intermittently are unable to shift into Reverse. When checking the vehicle for DTCs, the engine control module (ECM) may report P0502 as current or in history. This may be caused by water intrusion into the vehicle’s manual transmission output speed sensor or could be induced by the customer slipping the clutch for an extended period of time, as in holding the vehicle on a hill.
CADILLAC, CHEVROLET · 2015-12-04
Some customers may comment on a malfunction indicator lamp (MIL) illuminated. They may also comment that they intermittently are unable to shift into Reverse. When checking the vehicle for DTCs, the engine control module (ECM) may report P0502 as current or in history. This may be caused by water intrusion into the vehicle’s manual transmission output speed sensor or could be induced by the customer slipping the clutch for an extended period of time, as in holding the vehicle on a hill.
CADILLAC, CHEVROLET · 2015-12-01
Malfunction Indicator Lamp (MIL) Illuminated, Intermittently Unable to Shift into Reverse, DTC P0502 Set
CADILLAC, CHEVROLET · 2015-12-01
Malfunction Indicator Lamp (MIL) Illuminated, Intermittently Unable to Shift into Reverse, DTC P0502 Set Condition/Concern Some customers may comment on a malfunction indicator lamp (MIL) illuminated. They may also comment that they intermittently are unable to shift into Reverse. When checking the vehicle for DTCs, the engine control module (ECM) may report P0502 as current or in history. This may be caused by water intrusion into the vehicle’s manual transmission output speed sensor or could be induced by the customer slipping the clutch for an extended period of time, as in holding the vehicle on a hill.
CADILLAC, CHEVROLET · 2015-06-10
This preliminary informational bulletin provides repair information to correct a customer concern of Malfunction Indicator Lamp (MIL) illuminated. Technician may find DTC P0502: Vehicle Speed Sensor (VSS) Circuit Low Voltage.
CHEVROLET, GMC, HUMMER · 2012-10-29
This Preliminary Information communication provides information to the technician about vehicles the have a Service Engine Soon Malfunction Indicator Lamp on and or engine running rough. Technician may find Diagnostic Trouble Codes P0106, P0107, P0171, P0300, P0502, P1107, and P2431. Technician will need to inspect all Manifold Absolute Pressure sensor circuits for being broken inside of the insulation near the Manifold Absolute Pressure sensor connector.
CHEVROLET, GMC · 2009-05-01
GMC/CHEVROLET: THE SPEEDOMETER BEING INOPERATIVE AND/OR THE SES MIL ON. WHEN CHECKING FOR DTCS THE ECM WILL HAVE A P0502 OR P0500 SET. THIS ISSUE MAY BE INTERMITTENT AND FOLLOWING NORMAL DIAGNOSITC IN SI2000 MAY NOT LEAD TO A CORRECTION. THIS CONCERN COULD BE CAUSED BY THE TCCM (TRANSFER CASE CONTROL MODULE) NOT COMMUNICATING ON THE CLASS 2 BUSS. THE 4WD SYSTEM MAY WORK NORMAL, BUT WHEN USING THE TECH 2 TO COMMUNICATE WITH THE TCCM IT WILL NOT COMMUNICATE. C4500-C5500 SERIES. *PE
OLDSMOBILE, PONTIAC · 2002-11-01
ERRATIC SPEEDOMETER, ERRATIC SHIFTING, CRUISE CONTROL INOPERATIVE, DIAGNOSTIC TROUBLE CODE P0502, P0758, P1860 SET. *TT
ISUZU · 2000-12-01
SOME VEHICLES MAY RANDOMLY SET A PCM CODE P0502 IN A DECELERATION MODE USUALLY WITH 0% THROTTLE. THE MALFUNCTION INDICATOR LIGHT WILL ONLY SET AFTER THE FAULT HAS BEEN DETECTED FOR TWO CONSECUTIVE KEY CYCLES. *TT