보기

P06A6 · 제조사 기술 자료

목록의 차량은 조사 단서입니다. 제조사 자료에서 엔진, 생산 기간, 소프트웨어 조건을 확인하세요.

P06A6 ← 이 코드는 무엇을 뜻하나요?

5 결과

SSM 50245 ↗

FORD · 2021-10-29

Some 2020-2021 Escape vehicles may exhibit various symptoms due to a loss of voltage reference (VREF) from the 14290 harness above the steering shaft u-joint. Possible symptoms may include an illuminated malfunction indicator lamp (MIL),runs rough, fuse 44 open and may or may not set DTCs P06A7, P0840, P0842, P0845, P0847, P2122, P2127, P0522, P008A, P06A6, P2196, P0192, P0369, P0212, P0340, P0344, P0365, P0532,P0504, P07E4, P06E9, P0369, C175E, C175B, C2302, and/or C0040. Inspect the 14290 harness directly above the steering shaft u-joint near the upper brake pedal mount that may come in contact with the steering shaft. Rotation of the steering wheel may cause the short circuit. If damage is found, repair as necessary and move the harness away from the steering shaft U-joint area and…

SSM 50116 ↗

FORD · 2021-09-14

Some 2020-2021 Escape vehicles may exhibit a loss of voltage reference (VREF) or runs rough, blow fuse 44 and may or may not set DTC's P06A7,P0840,P0842,P0845,P0847,P2122,P2127,P0522,P008A,P06A6,P2196,P0192, P0212,P0340,P0344,P0365,P0532,P06E9,P0369,C175E,C175B,C2302,P0369. The 14290 harness directly above the steering shaft u-joint near the upper brake pedal mount may come in contact with the steering shaft. Rotation of the steering wheel will trigger the short circuit. Inspect the harness for damage at that location and repair as necessary. If damage was found, move the harness away from the steering shaft U-joint area and secure the harness. Refer to Wiring Diagram Cell 005.

TSB 19-2231 ↗

FORD · 2019-07-25

Some 2017-2019 F-Super Duty vehicles equipped with a 6.7L engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P1291, P1292, P0191 and/or P06A6. This may be due to an engine harness chafe on the powertrain control module (PCM) bracket. Before completing Powertrain Control/Emissions Diagnosis (PC/ED) Manual pinpoint tests, follow the Service Procedure steps.

SSM 46456 ↗

FORD · 2017-03-14

SOME 2017 F-SUPER DUTY VEHICLES EQUIPPED WITH A 6.7L ENGINE AND BUILT ON OR BEFORE 07-FEB-17 MAY EXHIBIT A ILLUMINATED MALFUNCTION INDICATOR LAMP (MIL) ON WITH DTC P06A6, P0193, P02E9, P0335, P0532 AND/OR P2454. THIS MAY BE DUE TO A CONCERN WITH THE REFERENCE VOLTAGE OR SIGNAL RETURN CIRCUIT OF THE CRANKSHAFT POSITION SENSOR (CKP) WIRING. INSPECT CKP SENSOR HARNESS CIRCUITS APPROXIMATELY 381MM(15 INCHES) FROM THE CKP SENSOR CONNECTOR FOR DAMAGE OR EVIDENCE OF BEING PINCHED. IF A WIRING CONCERN IS FOUND, REPAIR AS DIRECTED PER WIRING DIAGRAM SECTION 5. USE CAUSAL PART 12B637 AND UTILIZE APPLICABLE LABOR OPERATIONS FROM SECTION 10 OF THE SERVICE LABOR TIME STANDARDS (SLTS) MANUAL.

SSM 46351 ↗

FORD · 2017-01-30

SOME 2017 F-SUPER DUTY EQUIPPED WITH A 6.7L ENGINE MAY EXHIBIT A MIL ON WITH DTC P06A6, P0193, P02E9, P0335, P0532 AND/OR P2454. THIS MAY BE DUE TO A CONCERN WITH THE REFERENCE VOLTAGE OR SIGNAL RETURN CIRCUIT OF THE CRANKSHAFT POSITION SENSOR (CKP) WIRING. INSPECT CKP SENSOR HARNESS CIRCUITS APPROXIMATELY 381MM(15 INCHES) FROM THE CKP SENSOR CONNECTOR FOR DAMAGE OR EVIDENCE OF BEING PINCHED. IF A WIRING CONCERN IS FOUND, REPAIR AS DIRECTED PER WIRING DIAGRAM SECTION 5. USE CAUSAL PART 12B637 AND UTILIZE APPLICABLE LABOR OPERATIONS FROM SECTION 10 OF THE SERVICE LABOR TIME STANDARDS (SLTS) MANUAL.