목록의 차량은 조사 단서입니다. 제조사 자료에서 엔진, 생산 기간, 소프트웨어 조건을 확인하세요.
P287C ← 이 코드는 무엇을 뜻하나요?6 결과
ACURA · 2016-03-01
Replacement TCMs don?t come with trim data. After installation, you need to run a teach-in (hydraulic pressure characteristic calibration) procedure with the HDS. The problem is that A/T DTC P287C (transmission adaptive values not learned) is set, which prevents teach-in.
HONDA · 2016-03-01
Replacement TCMs don?t come with trim data. After installation, you need to run a teach-in (hydraulic pressure characteristic calibration) procedure with the HDS. The problem is that A/T DTC P287C (transmission adaptive values not learned) is set, which prevents teach-in.
HONDA · 2016-03-01
Replacement TCMs don’t come with trim data. After installation, you need to run a teach-in (hydraulic pressure characteristic calibration) procedure with the HDS. The problem is that A/T DTC P287C (transmission adaptive values not learned) is set, which prevents teach-in. This happens because the TCM is programmed to look for trim data any time the ignition is cycled. If the TCM doesn’t see that trim data, it sets A/T DTC P287C. If any DTCs are set, the TCM won’t initiate teach-in and, as a result, can’t learn the trim data. It’s a classic catch-22 situation.
ACURA · 2016-03-01
Replacement TCMs don’t come with trim data. After installation, you need to run a teach-in (hydraulic pressure characteristic calibration) procedure with the HDS. The problem is that A/T DTC P287C (transmission adaptive values not learned) is set, which prevents teach-in. This happens because the TCM is programmed to look for trim data any time the ignition is cycled. If the TCM doesn’t see that trim data, it sets A/T DTC P287C. If any DTCs are set, the TCM won’t initiate teach-in and, as a result, can’t learn the trim data. It’s a classic catch-22 situation.
ACURA · 2015-11-20
TECHLINE SUMMARY ARTICLE - REPLACEMENT TCMS DON’T COME WITH TRIM DATA. AFTER INSTALLATION, YOU NEED TO RUN A TEACH-IN (HYDRAULIC PRESSURE CHARACTERISTIC CALIBRATION) PROCEDURE WITH THE HDS. THE PROBLEM IS THAT A/T DTC P287C (TRANSMISSION ADAPTIVE VALUES NOT LEARNED) IS SET, WHICH PREVENTS TEACH-IN.
HONDA · 2015-11-19
TECHLINE SUMMARY ARTICLE - REPLACEMENT TCMS DON’T COME WITH TRIM DATA. AFTER INSTALLATION, YOU NEED TO RUN A TEACH-IN (HYDRAULIC PRESSURE CHARACTERISTIC CALIBRATION) PROCEDURE WITH THE HDS. THE PROBLEM IS THAT A/T DTC P287C (TRANSMISSION ADAPTIVE VALUES NOT LEARNED) IS SET, WHICH PREVENTS TEACH-IN.