목록의 차량은 조사 단서입니다. 제조사 자료에서 엔진, 생산 기간, 소프트웨어 조건을 확인하세요.
U0565 ← 이 코드는 무엇을 뜻하나요?8 결과
FORD, LINCOLN · 2025-10-24
This article supersedes TSB 25-2104 to update the labor times associated with the Service Procedure. Some of the vehicles listed in the Model statement above may exhibit all of the following conditions: * Inoperative BlueCruise and lane centering * DTC U2018:51 stored in the camera module - rear (CMR) * DTC U0565:86 stored in the image processing module A (IPMA) * DTC U3000:49 is not stored in the CMR This may be due to the software in the CMR.
FORD, LINCOLN · 2024-08-22
This article supersedes TSB 24-2087 to update the vehicle lines, model years affected, action and service procedure. Some 2021-2024 Mustang Mach-E/F-150, 2022-2024 F-150 Lightning/Expedition/Navigator, 2023-2024 Corsair vehicles may exhibit an inoperative BlueCruise and lane centering with DTCs U2018:51 stored in the camera module - rear (CMR) and U0565:86 stored in the image processing module A (IPMA) without DTC U3000:49 stored in the CMR. This may be due to the software level of the CMR. To correct the condition, follow the Service Procedure to reprogram the CMR module using the latest software level of the Ford Diagnosis and Repair System (FDRS).
JEEP · 2024-05-14
"Rear View Camera Module Please review SOL S248A000008. A dealer may find vehicles equipped with RVC only, sales code XAC, may set U0565-00 erroneously in the radio. This fault code will not cause any operational issues. The rear camera is sending implausible data to the radio at times. If the technician is working on a vehicle with the above condition, a technician should not replace any parts if RVC is operating without any issues. Replacement cameras will set the same DTC without any operational complaints. Engineering is working on an update to improve the erroneous DTC from setting and the field will be notified upon completion."
JEEP · 2024-05-10
Diagnostic Trouble Code (DTC) U0565-00 Implausible Data Received From Rear View Camera Module Active or Stored in Radio
FORD · 2024-03-25
Some 2022-2023 Mustang Mach-E vehicles which recently received a software update delivered over-the-air (OTA) may exhibit an inoperative BlueCruise and lane centering with diagnostic trouble codes (DTCs) U2018:51 stored in the camera module - rear (CMR) and U0565:86 stored in the image processing module A (IPMA). This may be due to the software level of the CMR. To correct the condition, follow the Service Procedure to reprogram the CMR module using the latest software level of the Ford Diagnosis and Repair System (FDRS).
FORD · 2024-03-12
Some 2022-2023 Mustang Mach-E vehicles which recently received an OTA update may exhibit an inoperative BlueCruise and lane centering with diagnostic trouble codes (DTCs) U2018:51 stored in the camera module - rear (CMR) and U0565:86 stored in the image processing module A (IPMA). This may be due to the software level of the CMR. Inform customers that engineering is currently working on a solution for this condition and will be released via Ford Power-Up software updates delivered over-the-air (OTA) expected in mid-late March 2024. The software will update automatically if vehicle connectivity is enabled on the vehicle's settings. Schedule a service visit for customers who have disabled vehicle connectivity or who report that they did not receive the update in March 2024. Monitor OASIS…
FORD · 2024-03-07
Some 2022-2023 Mustang Mach-E vehicles which recently received a Ford Power-Up software updates delivered over-the-air (OTA) may exhibit an inoperative BlueCruise and lane centering with diagnostic trouble codes (DTCs) U2018:51 stored in the camera module - rear (CMR) and U0565:86 stored in the image processing module A (IPMA). This may be due to the software level of the CMR.
FORD · 2024-01-26
Some 2022-2023 Mustang Mach-E vehicles which recently received an OTA update may exhibit an inoperative BlueCruise and lane centering with diagnostic trouble codes (DTCs) U2018:51 stored in the camera module - rear (CMR) and U0565:86 stored in the image processing module A (IPMA). This may be due to the software level of the CMR. Inform customers that engineering is currently working on a solution for this condition and will be released via Ford Power-Up software updates delivered over-the-air (OTA) expected in March 2024. The software will update automatically if vehicle connectivity is enabled on the vehicle's settings. Schedule a service visit for customers who have disabled vehicle connectivity or who report that they did not receive the update in March 2024. Monitor OASIS for…