P0150 Subaru Air Fuel Ratio Circuit Bank 2 Sensor 1
Possible causes
– Faulty Air fuel ratio (A/F) sensor bank 2 sensor 1
– Air fuel ratio (A/F) sensor bank 2 sensor 1 harness is open or shorted
– Air fuel ratio (A/F) sensor bank 2 sensor 1 circuit poor electrical connection
– Inappropriate fuel pressure
– Faulty fuel injectors
– Intake air leaks may be faulty
– Exhaust gas leaks
– Air fuel ratio (A/F) sensor bank 2 sensor 1 harness is open or shorted
– Air fuel ratio (A/F) sensor bank 2 sensor 1 circuit poor electrical connection
– Inappropriate fuel pressure
– Faulty fuel injectors
– Intake air leaks may be faulty
– Exhaust gas leaks
Tech description
Replacing the Air fuel ratio (A/F) sensor bank 2 sensor 1 usually takes care of the problem.
What about the obd code?
The Air Fuel Ratio (A/F) signal computed by Engine Control Module (ECM) from the A/F sensor 1 signal is constantly in the range other than approx. 1.5V.
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
– High Fuel Consumption
– Excessive Smoke from Exhaust
– High Fuel Consumption
– Excessive Smoke from Exhaust
P0150 Subaru Description
The Air Fuel Ratio (A/F) sensor is a planar dual-cell limit current sensor. The sensor element of the A/F sensor is the combination of a Nernst concentration cell (sensor cell) with an oxygen-pump cell, which transports ions. It has a heater in the element.
The sensor is capable of precise measurement