P0352 Cadillac Ignition Coil 2 Primary/Secondary Circuit
Possible causes
– Faulty Ignition Coil 2
– Ignition Coil 2 harness is open or shorted
– Ignition Coil 2 circuit poor electrical connection
– Faulty Engine Control Module (ECM)
– Ignition Coil 2 harness is open or shorted
– Ignition Coil 2 circuit poor electrical connection
– Faulty Engine Control Module (ECM)
What about the obd code?
Each ignition circuit is continuously monitored by the Engine Control Module (ECM). The test fails when the ECM does not receive a valid pulse signal from the ignition coil.
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
– Lack/Loss of Power
– Engine may be harder to start
– Engine hesitation
– Rough engine idle
– Lack/Loss of Power
– Engine may be harder to start
– Engine hesitation
– Rough engine idle
P0352 Cadillac Description
The ignition system on the vehicle uses individual ignition coils for each cylinder. The Engine Control Module (ECM) controls each ignition coil operation. The ECM sends a ON/OFF signal to energize the ignition coil to create a spark at the spark plug when a spark is required at the cylinder.
Cadillac Vehicle:Cadillac CTS Coupe, Cadillac CTS-V Coupe , Cadillac Eldorado , Cadillac Escalade EXT , Cadillac ATS , Cadillac CTS , Cadillac CTS Sedan , Cadillac CTS Sport Sedan , Cadillac CTS-V , Cadillac CTS-V Sedan , Cadillac Catera , Cadillac DTS , Cadillac DeVille , Cadillac STS-V , Cadillac STS , Cadillac Seville , Cadillac XTS , Cadillac XLR , Cadillac XLR Platinum , Cadillac Escalade , Cadillac SRX