P0654 Cadillac Engine Speed Output Circuit

P0654 Cadillac Engine Speed Output Circuit

Possible causes
– Faulty Instrument Cluster
– Instrument Cluster harness is open or shorted
– Instrument Cluster circuit poor electrical connection
– Faulty PCM
What about the obd code?
If the fault detection circuit senses a voltage other than what is expected, the fault line status changes causing the P0654 Cadillac code will set.
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
P0654 Cadillac Description

The Instrument Panel Cluster (IPC) supplies a voltage to the Engine Speed Output circuit. The Powertrain Control Module (PCM) creates the Engine Speed Output signal by rapidly grounding this circuit via an internal switch called a driver. The other components on this circuit recognize the voltage being pulled to ground as an indication of engine speed. The driver supplies the ground for the component being controlled. Each driver has a fault line which the PCM monitors. When the PCM commands a component ON, the voltage of the control circuit should be low (near 0 volts). When the PCM commands the control circuit to a component OFF, the voltage potential of the circuit should be high (near battery voltage).

Cadillac Vehicle:Cadillac CTS Coupe, Cadillac CTS-V Coupe , Cadillac Eldorado , Cadillac Escalade EXT , Cadillac ATS , Cadillac CTS , Cadillac CTS Sedan , Cadillac CTS Sport Sedan , Cadillac CTS-V , Cadillac CTS-V Sedan , Cadillac Catera , Cadillac DTS , Cadillac DeVille , Cadillac STS-V , Cadillac STS , Cadillac Seville , Cadillac XTS , Cadillac XLR , Cadillac XLR Platinum , Cadillac Escalade , Cadillac SRX