P0760 Isuzu Shift Solenoid C Malfunction
Possible causes
– Low transmission fluid level
– Dirty transmission fluid
– Faulty shift solenoid ‘C’ valve
– Shift solenoid ‘C’ valve harness or connectors
– Shift solenoid ‘C’ valve circuit is open or shorted
– Dirty transmission fluid
– Faulty shift solenoid ‘C’ valve
– Shift solenoid ‘C’ valve harness or connectors
– Shift solenoid ‘C’ valve circuit is open or shorted
What about the obd code?
The P0760 Isuzu code is detected when the TCM detects an improper voltage drop when it tries to operate the solenoid valve.
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
– Transmission will not shift gears
– Transmission will not shift gears
P0760 Isuzu Description
Shift solenoid valve ‘C’ is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Gears will then be shifted to the optimum position.
Isuzu Vehicle:2013 Isuzu,2012 Isuzu,2011 Isuzu,2010 Isuzu,2009 Isuzu,2008 Isuzu,2007 Isuzu,2006 Isuzu,2005 Isuzu,2004 Isuzu,2003 Isuzu,2002 Isuzu,2001 Isuzu,2000 Isuzu,1999 Isuzu,1998 Isuzu,1997 Isuzu,1996 Isuzu,Isuzu Rodeo,Isuzu Trooper,Isuzu Ascender