P0770 Isuzu Shift Solenoid E Malfunction
Possible causes
– Low transmission fluid level
– Dirty transmission fluid
– Faulty shift solenoid ‘E’ valve
– Shift solenoid ‘E’ valve harness is open or shorted
– Shift solenoid ‘E’ valve circuit poor electrical connection
– Dirty transmission fluid
– Faulty shift solenoid ‘E’ valve
– Shift solenoid ‘E’ valve harness is open or shorted
– Shift solenoid ‘E’ valve circuit poor electrical connection
Tech description
There is a factory service bulletin for the following models:
2003 Corolla
2003 Matrix
2003 Factory Service Bulletin OBDII Code P0770 Isuzu
What about the obd code?
The P0770 Isuzu code is detected when Lock up does not occur when driving in the lock up range (normal driving at 80 km/h [50 mph]), or lock up remains ON in the lock up OFF range.
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
– Transmission will not shift gears.
– Transmission will not shift gears.
P0770 Isuzu Description
The ECM uses the signals from the Throttle Position Sensor and Air flow Meter to monitor the engagement condition of the lock up clutch. Then the ECM compares the engagement condition of the lock up clutch with the lock up schedule in the ECM memory to detect mechanical trouble of the shift solenoid valve SLU, valve body, torque converter clutch and automatic transmission assembly
Isuzu Vehicle:2013 Isuzu,2012 Isuzu,2011 Isuzu,2010 Isuzu,2009 Isuzu,2008 Isuzu,2007 Isuzu,2006 Isuzu,2005 Isuzu,2004 Isuzu,2003 Isuzu,2002 Isuzu,2001 Isuzu,2000 Isuzu,1999 Isuzu,1998 Isuzu,1997 Isuzu,1996 Isuzu,Isuzu Rodeo,Isuzu Trooper,Isuzu Ascender