P0795 Audi Pressure Control Solenoid Valve C
Possible causes
– Low transmission fluid level
– Dirty transmission fluid
– Faulty pressure control solenoid valve ‘C’
– Pressure control solenoid valve ‘C’ harness is open or shorted
– Pressure control solenoid valve ‘C’ circuit poor electrcial connection
– Dirty transmission fluid
– Faulty pressure control solenoid valve ‘C’
– Pressure control solenoid valve ‘C’ harness is open or shorted
– Pressure control solenoid valve ‘C’ circuit poor electrcial connection
What about the obd code?
The P0795 Audi code is detected when the when normal voltage is not applied to solenoid due to open or short or when TCM detects as irregular by comparing target value with monitor value.
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
– Shift shock
– Shift shock
P0795 Audi Description
The pressure control solenoid valve ‘C’ is normally low pressure control solenoid. The solenoid is activated to control the apply and release of the 2nd brake and 1st and reverse brake, and torque converter clutch. Lock-up operation, however, is prohibited when A/T fluid temperature is too low. When the accelerator pedal is depressed (less than 1/8) in lockup condition, the engine speed should not change abruptly. If there is a big jump in engine speed, there is no lock-up.
Audi Vehicle:Audi A1,Audi A3,Audi A1,Audi A3,Audi A1,Audi A3,Audi A4,Audi A5,Audi Q3,Audi A5,Audi Q5,Audi A3,Audi A4,Audi A5,Audi TT,Audi Q3,Audi Q5,Audi S3,Audi TTS,Audi RS 3,Audi TT RS,Audi A7,Audi Q7,Audi A8,Audi A6,Audi S4,Audi S5,Audi Q5,Audi S6,Audi S8,Audi S5,Audi A8,Audi R8 V8,Audi RS 5,Audi S6,Audi R8 V10,Audi R8 GT,Audi A8L