P1167 Isuzu Heated Rear Oxygen Sensor 2 Maximum Voltage Monitoring Bank 2
Possible causes
– Faulty Heated Rear Oxygen Sensor Bank 2
– Heated Rear Oxygen Sensor Bank 2 harness is open or shorted
– Heated Rear Oxygen Sensor Bank 2 circuit poor electrical connection
– Fuel pressure
– Injectors
– Intake air leaks
– Heated Rear Oxygen Sensor Bank 2 harness is open or shorted
– Heated Rear Oxygen Sensor Bank 2 circuit poor electrical connection
– Fuel pressure
– Injectors
– Intake air leaks
Tech description
Replacing the Rear Oxygen (O2) Sensor usually takes care of the problem
What about the obd code?
The P1167 Isuzu code is triggered when the maximum voltage from the sensor is not reached to the specified voltage.
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
– Possible high fuel consumption
– Possible excessive smoke from exhaust
– Possible high fuel consumption
– Possible excessive smoke from exhaust
P1167 Isuzu Description
The heated oxygen sensor 2 (rear), after three way catalyst, monitors the oxygen level in the exhaust gas on each bank. Even if switching characteristics of the heated oxygen sensor 1 (front) are shifted, the air fuel ratio is controlled to stoichiometric, by the signal from the heated oxygen sensor 2. This sensor is made of ceramic zirconia. The zirconia generates voltage from approximately 1V in richer conditions to 0V in leaner conditions. Under normal conditions the heated oxygen sensor 2 is not used for engine control operation.
Isuzu Vehicle:2013 Isuzu,2012 Isuzu,2011 Isuzu,2010 Isuzu,2009 Isuzu,2008 Isuzu,2007 Isuzu,2006 Isuzu,2005 Isuzu,2004 Isuzu,2003 Isuzu,2002 Isuzu,2001 Isuzu,2000 Isuzu,1999 Isuzu,1998 Isuzu,1997 Isuzu,1996 Isuzu,Isuzu Rodeo,Isuzu Trooper,Isuzu Ascender