P1217 Isuzu Fuel Solenoid Response Time Too Long
Possible causes
– Thermostat
– Cooling fan harness is open or shorted
– Cooling fan circuit poor electrical connection
– Faulty cooling fan motor
– Engine Control Module (ECM) Program
– Faulty IPDM E/R
– Faulty Cooling fan control module
– Radiator hose
– Radiator
– Radiator cap
– Water pump
– Cooling fan harness is open or shorted
– Cooling fan circuit poor electrical connection
– Faulty cooling fan motor
– Engine Control Module (ECM) Program
– Faulty IPDM E/R
– Faulty Cooling fan control module
– Radiator hose
– Radiator
– Radiator cap
– Water pump
Tech description
The most Possible Causes that will trigger the P1217 Isuzu code is the thermostat.
What about the obd code?
– Cooling fan does not operate properly (Overheat)
– Cooling fan system does not operate properly (Overheat)
– Engine coolant was not added to the system using the proper filling method
– Engine coolant is not within the specified range.
– Cooling fan system does not operate properly (Overheat)
– Engine coolant was not added to the system using the proper filling method
– Engine coolant is not within the specified range.
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
– Engine overheating
– Engine overheating
P1217 Isuzu Nissan Description
If the cooling fan or another component in the cooling system malfunctions, engine coolant temperature will rise. When the engine coolant temperature reaches an abnormally high temperature condition, a malfunction is indicated.
Isuzu Vehicle:2013 Isuzu,2012 Isuzu,2011 Isuzu,2010 Isuzu,2009 Isuzu,2008 Isuzu,2007 Isuzu,2006 Isuzu,2005 Isuzu,2004 Isuzu,2003 Isuzu,2002 Isuzu,2001 Isuzu,2000 Isuzu,1999 Isuzu,1998 Isuzu,1997 Isuzu,1996 Isuzu,Isuzu Rodeo,Isuzu Trooper,Isuzu Ascender