P1228 Infiniti Injector Circuit Cylinder 3 Intermittent

P1228 Infiniti Injector Circuit Cylinder 3 Intermittent

Possible causes
  • Harness or connectors (The APP sensor 2 circuit is open or shorted.)
  • Accelerator pedal position sensor (Accelerator pedal position sensor 2)
    • What about the obd code?
  • An excessively high voltage from the APP sensor 2 is sent to ECM.
    • Symptoms
    – Engine Light ON (or Service Engine Soon Warning Light)
    P1228 Infiniti Description

    The accelerator pedal position sensor is installed on the upper end of the accelerator pedal assembly. The sensor detects the accelerator position and sends a signal to the ECM.

    Accelerator pedal position sensor has two sensors. These sensors are a kind of potentiometers which transform the accelerator pedal position into output voltage, and emit the voltage signal to the ECM. In addition, these sensors detect the opening and closing speed of the accelerator pedal and feed the voltage signals to the ECM. The ECM judges the current opening angle of the accelerator pedal from these signals and controls the throttle control motor based on these signals.

    Idle position of the accelerator pedal is determined by the ECM receiving the signal from the accelerator pedal position sensor. The ECM uses this signal for the engine operation such as fuel cut.

    Infiniti Vehicle:Infiniti EX35,Infiniti FX35,Infiniti FX50,Infiniti G25,Infiniti G37,Infiniti M35,Infiniti M37,Infiniti M56,Infiniti QX562013 Infiniti,2012 Infiniti,2011 Infiniti,2010 Infiniti,2009 Infiniti,2008 Infiniti,2007 Infiniti,2006 Infiniti,2005 Infiniti,2004 Infiniti,2003 Infiniti,2002 Infiniti,2001 Infiniti,2000 Infiniti,1999 Infiniti,1998 Infiniti,1997 Infiniti,1996 Infiniti,
    CategoriesUncategorized