P1300 Isuzu Igniter Circuit Malfunction No. 1
Possible causes
– Ignition Coil No. 1 harness is open or shorted
– Ignition Coil No. 1 circuit poor electrical connection
– Faulty Ignition Coil No. 1
– Faulty Engine Control Module (ECM)
– Ignition Coil No. 1 circuit poor electrical connection
– Faulty Ignition Coil No. 1
– Faulty Engine Control Module (ECM)
What about the obd code?
The P1300 Isuzu code is for the ignition coil No.1 and is set when there is no IGF signal to the ECM during engine operation.
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
P1300 Isuzu Description
Direct Ignition System (DIS) is a 1-cylinder ignition system that ignites one cylinder with one ignition coil. Ignitor is integral to ignition coil. The Engine Control Module (ECM) determines ignition timing and outputs a ignition signal (IGT) for each cylinder. Based on the IGT signals, power transistors in the ignitor cut of current to primary coil in ignition coil, causing ignition coil to fire spark plug. After delivering a command to turn off primary circuit on the IGT wire, ECM monitors IGF circuit to ensure primary switching occurred.
Isuzu Vehicle:2013 Isuzu,2012 Isuzu,2011 Isuzu,2010 Isuzu,2009 Isuzu,2008 Isuzu,2007 Isuzu,2006 Isuzu,2005 Isuzu,2004 Isuzu,2003 Isuzu,2002 Isuzu,2001 Isuzu,2000 Isuzu,1999 Isuzu,1998 Isuzu,1997 Isuzu,1996 Isuzu,Isuzu Rodeo,Isuzu Trooper,Isuzu Ascender