C2500 · Comunicados do fabricante

NISSAN · 2025-01-13

ADAS DTC SERVICE INFORMATION SERVICE INFORMATION If one or more of the following ADAS (Advanced Driver Assistance System) DTCs are stored, but continue to be current after the vehicle is turned OFF (IGN OFF) and then back to Ready Mode (IGN ON),  C1F90-97 – ADAS control unit 2 circuit  C1F05-49 – Front camera unit  C1F05-97 – Front camera unit  C1F05-04 – Front camera unit  U19BC-87 – CAN comm err (Side radar rear LH)  U19BD-87 – CAN comm err (Side radar rear RH)  U19C2-87 – Ethernet circuit ERROR(AVM)  U19C7-87 – Ethernet comm err (HD map module)  U19C6-87 – Ethernet comm err (Front camera)  C21F6-49 – Camera  C258E-86 – Steering Angle Sensor  C2500-49 – Camera unit malf  C2506-49 – Front camera unit  U2159-87 – CAN communication error (steering control unit)  C2540-04 –…

NISSAN · 2020-08-31

TRAFFIC SIGN RECOGNITION OR LANE DEPARTURE WARNING MALFUNCTION DISPLAYED AND MIL ON WITH DTC C2503-54 AND/OR C1F6B-54 STORED IF YOU CONFIRM The customer states that one of the following warnings is displayed on the vehicle information display along with the AEB Warning Light: ï‚· Traffic Sign Recognition Malfunction Displayed ï‚· Lane Departure Warning Malfunction Displayed And ï‚· The MIL is ON with DTC C2503-54 (CAMERA AIMING INCMP) and/or C1F6B-54 (CAMERA UNIT MALF) stored. NOTE: If DTC C2500-49 and/or C1F6B-49 is stored, this TSB does not apply. ACTION ï‚· If the vehicle was built on or before 1/31/2020, remove material from the lane camera and then reprogram the lane camera control unit. ï‚· If the vehicle was built after 1/31/2020 but before 5/29/2020, skip to step 6 and reprogram…