Ver

P0090 · Comunicados do fabricante

A relação com um veículo é uma pista. Confirme motor, produção e software na documentação do fabricante.

P0090 ← O que significa este código?

5 Resultados

PIP6061 ↗

BUICK, CHEVROLET, GMC · 2025-05-01

This Preliminary information communicates there could be an electrical connection concerns at the high pressure fuel pump, and may set any combnation of diagnostic trouble codes, P0089 P0090 P00C6 P163A and / or P228C. The technician should inspect the terminals and manipulate the harness to see if any of the codes can be duplicated. Replace or repair connector or terminals as needed.

MAS004191 BOL 24-19 ↗

MASERATI · 2024-05-01

This Diagnostic Sheet serves as a guide and provides additional diagnostic info for possible DTC"P0090 - Fuel Pressure Regulator Control Circuit 1 Open" stored in the engine control unit (ECM).

MAS003581 ↗

MASERATI · 2023-06-09

Guidance to investigate vehicles related to the storage of ECM of DTC P0090 - Fuel Pressure Regulator 1 Control Circuit Opened Link to engine warning light on and limp home mode.

ITB17-010 ↗

INFINITI · 2017-02-21

2016-2017 QX80; MIL ON WITH P0090 AND U1000 AND/OR U1001 STORED IF YOU CONFIRM MIL is ON with the following DTC stored: - P0090 (FRP CONTROL SYSTEM) And U1000 and/or U1001 DTCs are stored in one or more other control units. NOTE: If P0090 is set and U1000 and/or U1001 DTCs are not set, this Bulletin does not apply. Refer to the Electronic Service Manual (ESM) for further diagnostic information. ACTION Replace the IPDM with one listed in the Parts Information.

NTB17-020 ↗

NISSAN · 2017-02-21

2017 ARMADA; MIL ON WITH P0090 AND U1000 AND/OR U1001 STORED IF YOU CONFIRM MIL is ON with the following DTC stored: - P0090 (FRP CONTROL SYSTEM) And U1000 and/or U1001 DTCs are stored in one or more other control units. NOTE: If P0090 is set and U1000 and/or U1001 DTCs are not set, this Bulletin does not apply. Refer to the Electronic Service Manual (ESM) for further diagnostic information. ACTION Replace the IPDM with one listed in the Parts Information. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.