P060A · Comunicados do fabricante

AUDI · 2026-09-25

This bulletin provides information when the gearbox warning light illuminates; drive system fault with event memory entry P060A00; P1FD700.

AUDI · 2026-06-23

Ths bulletin provides informaiotn when the gearbox warning lamp is on, DTC P060A00 (8693) in gearbox control unit; 0BK and 0BL gearbox.

AUDI · 2026-06-22

Ths bulletin provides informaiotn when the gearbox warning lamp is on, DTC P060A00 (8693) in gearbox control unit; 0BK and 0BL gearbox.

AUDI · 2025-08-29

This Pending Service Solution (PSS) requests that technicians enter a record in the PSS data base in instances where there is a Gearbox warning lamp; drive system fault DTC P060A00.

AUDI · 2025-08-19

This Pending Service Solution (PSS) requests that technicians enter a record in the PSS data base in instances where there is a Gearbox warning lamp; drive system fault DTC P060A00.

AUDI · 2025-08-18

This Pending Service Solution (PSS) requests that technicians enter a record in the PSS data base in instances where there is a Gearbox warning lamp; drive system fault DTC P060A00.

JEEP · 2025-04-18

Diagnostic Trouble Codes (DTCs) P060A, P0919, P0914, P1C73. Park Position Not Recognized. No Crank.

HONDA · 2025-02-14

Service Bulletin - Multiple warning lights on and the vehicle may go into fail-safe mode; DTC P060A Powertrain Control Module (PCM) Internal Control Module Malfunction has set.

MERCEDES-BENZ · 2025-01-24

Complaint - Power window reverses direction on reaching upper end position. - Power window inoperative, fault code P060A64 / B18C12A / B192015 is stored in fault memory of door control unit. Cause - Software error in door control unit (N69/X). - Power window motor(s) on front door, left (M10/3) and/or front door, right (M10/4) => On vehicles with CODE 808, 809 or 800. Remedy 1.) Read out hardware version of affected door control unit (N69/X) using quick test (see Figure 1). => For door control units with hardware version equal to/higher than 16/20 (year/week), continue with operation step 2. => For door control units with hardware versions 13/49, 14/23, 14/24 and 14/30, continue with operation step 3. 2.) Replace affected power window motor (M10/X). IMPORTANT NOTE (see also SI document…

FORD · 2024-09-28

Some 2025 Explorer vehicles equipped with a 2.3L EcoBoost engine may exhibit an illuminated MIL and/or powertrain malfunction (wrench) indicator. DTC P060A:75 and/or P0607:45 may be stored in the PCM with no other driveability symptoms.

FORD, LINCOLN · 2024-08-08

Some 2023-2024 Escape/Corsair, 2024 Nautilus vehicles may exhibit various AWD/4WD/4x4 warning messages displayed in the message center with loss of AWD function for the remainder of the active key cycle. DTCs C0095, C05D9:74, P060A, P060B, P060C, and/or P1674 may be stored in the AWD module. This condition may be due to the software in the AWD module.

HONDA · 2024-05-03

Owner Notification Letter - A software programming error may cause miscommunication between the main and sub-CPU systems. As a result, the main Central Processing Unit (CPU) determines this as an Integrated Control Module (ICM) failure, which prevents the grille from properly closing when the vehicle is turned off. This results in the Malfunction Indicator Lamp (MIL) illuminating and DTC P060A being set.

HONDA · 2023-04-03

Product Update - A software programming error may cause miscommunication between the main and sub-CPU systems. As a result, the main Central Processing Unit (CPU) determines this as an Integrated Control Module (ICM) failure, which prevents the grille from properly closing when the vehicle is turned off. This results in the Malfunction Indicator Lamp (MIL) illuminating and DTC P060A being set.

HONDA · 2023-02-03

Service Bulletin - A software programming error may cause miscommunication between the main and sub CPU systems. As a result, the main CPU determines this as an ICM failure which prevents the grill from properly closing when the vehicle is turned off. This results in the MIL (P060A) being set.

TOYOTA · 2021-09-10

TSB: Some 2021 model year Mirai vehicles may exhibit a MIL ON condition with Diagnostic Trouble Code (DTC) P060A47 (Hybrid/EV Battery Energy Control Module Monitoring Processor Watchdog / Safety MCU Failure) present. The Fuel Cell Vehicle (FCV) control computer logic has been modified to reduce the possibility of this condition. Follow the Repair Procedure in this bulletin to address this condition.

NISSAN · 2021-08-26

MIL ON WITH DTC P060A, P060C, AND/OR P061B STORED IN THE ECM This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.

NISSAN · 2021-08-12

MIL ON WITH DTC P060A OR P060C STORED IN THE ECM IF YOU CONFIRM The MIL is ON and DTC P060A (INTERNAL CONTROL MODULE MONITORING PROCESSOR PERFORMANCE) or DTC P060C (INTERNAL CONTROL MODULE MAIN PROCESSOR PERFORMANCE) is stored in the ECM. ACTION 1. Confirm the current ECM part number. 2. Reprogram the ECM, if applicable..

AUDI · 2021-04-26

The DTCs are stored due to an issue with the transmission control module software. Specific DFCCs are stored as a result of the following situations: ? DTC P060A00 with DFCC 8692 can be logged when a driving mode (Drive or Reverse) is selected within one second of selecting Neutral, while the vehicle rolls at a speed less than 2 mph (such as when the vehicle is being maneuvered in or out of a parking spot). ? DTC P060A00 with DFCC 8694 can be logged when the gear is quickly changed from Park to Neutral, due to a low diagnosis threshold. ? DTC P060A00 with DFCC 12480 can be logged when the gear is changed using the Tiptronic function, due to a low diagnosis threshold.

VOLVO · 2017-10-10

This is a Technical Journal: DTC BECM-P060A00 may appear when performing VIDA read out. If the DTC is present please follow step under Service. Reported symptoms are: - Error message in DIM BECM = Battery Energy Control Module DIM = Driver Information Module Service: Perform an upgrade of the software according to TJ 31543.

AUDI · 2016-01-11

Gearbox warning light on (DTCs P179E00, P179F00, P0700, P060A). The driver information system displays the message "gearbox malfunction: you can continue driving". There are two scenarios present. Scenario 1 is that entries are logged individually or in combination, with P179E logged first (using DTC environmental data).The entries are DTC P179E (Drive position sensor electrical error), DTC P0700 with DFCC 20196 (Transmission control system malfunction), DTC P1758 with DFCC 8464 (Terminal 15 voltage supply open circuit), and DTC P060A with DFCC 8126, 8345 (Internal control module monitoring processor performance) In this scenario, if DTC P179E is not logged first, this TSB does not apply. Scenario 2 is that entries are logged individually or in combination. The order in which the DTCs are…

AUDI · 2014-09-26

Transmission warning message in cluster (DTC P060A00)

AUDI · 2014-09-25

Supersedes Technical Service Bulletin Group 35 number 12-08 dated December 21, 2012. The driver information system displays the message ?Gearbox malfunction: you can continue driving?. Gearbox warning light on (DTCs P179E00, P179F00, P0700, P060A).

AUDI · 2014-08-01

Transmission warning message in cluster (DTC P060A00)

AUDI · 2013-09-11

The DTCs are stored due to an issue with the transmission control module software. Specific DFCCs are stored as a result of the following situations: ? DTC P060A00 with DFCC 8692 can be logged when a driving mode (Drive or Reverse) is selected within one second of selecting Neutral, while the vehicle rolls at a speed less than 2 mph (such as when the vehicle is being maneuvered in or out of a parking spot). ? DTC P060A00 with DFCC 8694 can be logged when the gear is quickly changed from Park to Neutral, due to a low diagnosis threshold. ? DTC P060A00 with DFCC 12480 can be logged when the gear is changed using the Tiptronic function, due to a low diagnosis threshold.

AUDI · 2013-04-01

The DTCs are stored due to an issue with the transmission control module software. Specific DFCCs are stored as a result of the following situations: - DTC P060A00 with DFCC 8692 can be logged when a driving mode (Drive or Reverse) is selected within one second of selecting Neutral, while the vehicle rolls at a speed less than 2 mph (such as when the vehicle is being maneuvered in or out of a parking spot). - DTC P060A00 with DFCC 8694 can be logged when the gear is quickly changed from Park to Neutral, due to a low diagnosis threshold. - DTC P060A00 with DFCC 12480 can be logged when the gear is changed using the Tiptronic function, due to a low diagnosis threshold.

AUDI · 2013-01-08

Transmission warning message in cluster (DTC P060A00)

AUDI · 2013-01-08

The entry P060A00 with DFCC 12480 can be logged in the TCM. This fault is only a diagnostic error. The fault will not affect vehicle performance.

AUDI · 2012-12-21

Gearbox warning light on (DTCs P179E00, P179F00, P0700, P060A)