P1644 · Comunicados do fabricante

MERCEDES-BENZ, MERCEDES-MAYBACH · 2025-04-11

Complaint Hand detection system not operating correctly / vehicles with code 266 Fault message in instrument cluster: "Active Emergency Stop Assist not available" "Active Lane Keeping Assist not available" Cause Possible causes: the hand detection mat, the hand detection control unit, the contacts and the steering wheel harness. Remedy Test Procedure: Perform an initial quick test with freeze frame data. Save the N179 - Hand detection system (HE) and N62/4 - Driver assistance system (SG-FAS) control unit logs. Note the fault frequency of fault codes set. Delete the N179 and N62/4 fault memory. Test: Please flash the IDC (N62/4) software A223 902 75 37 (only applies to HOSWD223). Erase fault memory Reset the HOSWD control unit in line with the guided test in Xentry. Using both hands,…

MERCEDES-BENZ, MERCEDES-MAYBACH · 2025-02-03

Complaint Hand detection system not operating correctly / vehicles with code 266 Fault message in instrument cluster: "Active Emergency Stop Assist not available" "Active Lane Keeping Assist not available" Cause Possible causes: the hand detection mat, the hand detection control unit, the contacts and the steering wheel harness. Remedy Test Procedure: Perform an initial quick test with freeze frame data. Save the N179 - Hand detection system (HE) and N62/4 - Driver assistance system (SG-FAS) control unit logs. Note the fault frequency of fault codes set. Delete the N179 and N62/4 fault memory. Using both hands, "scan" the steering wheel all the way round, including the chrome molding at 6 o'clock (see Picture 1). Read out fault memory and follow steps below for any faults set. Remedy:…

MERCEDES-BENZ, MERCEDES-MAYBACH · 2025-01-06

Complaint Hand detection system not operating correctly / vehicles with code 266 Fault message in instrument cluster: "Active Emergency Stop Assist not available" "Active Lane Keeping Assist not available" Cause Possible causes: the hand detection mat, the hand detection control unit, the contacts and the steering wheel harness. Remedy Test Procedure: Perform an initial quick test with freeze frame data. Save the N179 - Hand detection system (HE) and N62/4 - Driver assistance system (SG-FAS) control unit logs. Note the fault frequency of fault codes set. Delete the N179 and N62/4 fault memory. Using both hands, "scan" the steering wheel all the way round, including the chrome molding at 6 o'clock (see Picture 1). Read out fault memory and follow steps below for any faults set. Remedy:…

MERCEDES-MAYBACH · 2024-08-23

Complaint During boot up of the rear tablet the incorrect splash screen may be shown or the tablet is not able to connect to the vehicle. Fault code P164456 An incorrect variant coding or configuration was detected. An incorrect or incompatible configuration was detected may be stored. Cause Previous SCN code for the tablet cradle A105/6 - Electric controller unit for tablet cradle (TAS) Remedy Perform SCN coding for the tablet cradle A105/6 - Electric controller unit for tablet cradle (TAS) to resolve the concern.

MERCEDES-BENZ, MERCEDES-MAYBACH · 2024-07-15

Complaint Hand detection system not operating correctly / vehicles with code 266 Fault message in instrument cluster: "Active Emergency Stop Assist not available" "Active Lane Keeping Assist not available" Cause Possible causes: the hand detection mat, the hand detection control unit, the contacts and the steering wheel harness. Remedy Test Procedure: Perform an initial quick test with freeze frame data. Save the N179 - Hand detection system (HE) and N62/4 - Driver assistance system (SG-FAS) control unit logs. Note the fault frequency of fault codes set. Delete the N179 and N62/4 fault memory. Using both hands, "scan" the steering wheel all the way round, including the chrome molding at 6 o'clock (see Picture 1). Read out fault memory and follow steps below for any faults set. Remedy:…

PETERBILT · 2019-04-04

Non Safety Campaign: Vehicles were built with a 5 bolt supply wire for the air dryer pressure sensor that is no longer required with current architecture. If left in place, a fault code P1644 may be set.

MERCEDES-BENZ · 2014-01-21

FAULT CODE P164400 IN CONTROL UNIT OF ELECTRIC STEERING