P175E · Comunicados do fabricante

ISUZU · 2025-02-27

CAMPAIGN BULLETIN -- IN SOME 2025MY ISUZU N-SERIES VEHICLES EQUIPPED WITH 6.6L GASOLINE ENGINES AND 8L90 AUTOMATIC TRANSMISSIONS AND WHOLESALED PRIOR TO DECEMBER 13, 2024, THE ORIGINAL CALIBRATION IN THE TRANSMISSION CONTROL MODULE (TCM) CONTAINED INCORRECT LOGIC THAT MAY UNNECESSARILY CAUSE DIAGNOSTIC TROUBLE CODE (DTC) P175E TO SET AND ILLUMINATE THE CHECK ENGINE MALFUNCTION INDICATOR LIGHT (MIL). AN UPDATED TCM CALIBRATION CORRECTING THIS CONCERN IS NOW AVAILABLE. ADDITIONALLY, THE TRANSMISSION FAST LEARN PROCEDURE MUST BE COMPLETED AFTER THE TCM REPROGRAMMING HAS BEEN COMPLETED.

ISUZU · 2025-02-19

SERVICE BULLETIN -- THE ORIGINAL CALIBRATION IN THE TCM OF CERTAIN 2025MY N-GAS VEHICLES CONTAINED INCORRECT LOGIC THAT MAY UNNECESSARILY CAUSE DTC P175E TO SET AND ILLUMINATE THE CHECK ENGINE MALFUNCTION INDICATOR LIGHT (MIL). AN UPDATED TCM CALIBRATION CORRECTING THIS CONCERN IS NOW AVAILABLE. ADDITIONALLY, THE TRANSMISSION FAST LEARN MUST BE COMPLETED AFTER THE TCM CALIBRATION IS COMPLETED. DEALERS ARE TO REPROGRAM THE TCM WITH A CORRECTED SERVICE CALIBRATION AND PERFORM THE TRANSMISSION FAST LEARN. FOLLOW THE SERVICE PROCEDURE BELOW TO UPDATE THE TCM CALIBRATION AND PERFORM THE TRANSMISSION FAST LEARN AS REQUIRED.

ISUZU · 2025-01-31

IN SOME 2025MY ISUZU N-SERIES VEHICLES EQUIPPED WITH 6.6L GASOLINE ENGINES AND 8L90 AUTOMATIC TRANSMISSIONS AND WHOLESALED PRIOR TO DECEMBER 13, 2024, THE ORIGINAL CALIBRATION IN THE TRANSMISSION CONTROL MODULE (TCM) CONTAINED INCORRECT LOGIC THAT MAY UNNECESSARILY CAUSE DIAGNOSTIC TROUBLE CODE (DTC) P175E TO SET AND ILLUMINATE THE CHECK ENGINE MALFUNCTION INDICATOR LIGHT (MIL). AN UPDATED TCM CALIBRATION CORRECTING THIS CONCERN IS NOW AVAILABLE. ADDITIONALLY, THE TRANSMISSION FAST LEARN PROCEDURE MUST BE COMPLETED AFTER THE TCM REPROGRAMMING HAS BEEN COMPLETED.

ISUZU · 2025-01-31

CAMPAIGN BULLETIN: IN SOME 2025MY ISUZU N-SERIES VEHICLES EQUIPPED WITH 6.6L GASOLINE ENGINES AND 8L90 AUTOMATIC TRANSMISSIONS AND WHOLESALED PRIOR TO DECEMBER 13, 2024, THE ORIGINAL CALIBRATION IN THE TRANSMISSION CONTROL MODULE (TCM) CONTAINED INCORRECT LOGIC THAT MAY UNNECESSARILY CAUSE DIAGNOSTIC TROUBLE CODE (DTC) P175E TO SET AND ILLUMINATE THE CHECK ENGINE MALFUNCTION INDICATOR LIGHT (MIL). AN UPDATED TCM CALIBRATION CORRECTING THIS CONCERN IS NOW AVAILABLE. ADDITIONALLY, THE TRANSMISSION FAST LEARN PROCEDURE MUST BE COMPLETED AFTER THE TCM REPROGRAMMING HAS BEEN COMPLETED.

AUDI · 2024-03-13

This bulletin provides information when there is a gearbox warning light, DTC P176F00, P176E00, P175E00, P175D00 in the TCM.

AUDI · 2023-10-09

This bulletin provides information for when there is a Gearbox Malfunction warning stored in the TCM; DTCs P176F00, P176E00, P175E00, P175D00, P189900, P060700, P081000.

AUDI · 2023-08-02

This bulletin provides information for when Gearbox Malfunction Warning, DTC P0C2900, P176F00, P176E00 or P175E00 stored in the TCM.

FORD · 2021-08-31

Some 2020-2021 Mustang GT500 vehicles may exhibit a clatter noise/vibration in reverse (R) at 3-8 mph (5-13 km/h) and/or an illuminated powertrain malfunction (wrench) indicator with diagnostic trouble codes (DTCs) P175C, P175D, P175E, P0844, P0849 and/or P0874 set in the transmission control module (TCM). This may be due to the software in the TCM. To correct the condition, follow the Service Procedure steps to check the transmission fluid pressure sensor and reprogram the PCM/TCM.

FORD · 2021-03-03

Some 2020 Mustang GT500 vehicles may exhibit an illuminated powertrain malfunction (wrench) indicator with diagnostic trouble codes (DTC) P175E and/or P0874 set in the transmission control module (TCM). This may be due to the transmission fluid pressure sensor parameters set in the TCM. To correct the condition, follow the Service Procedure steps to check the transmission fluid pressure sensor and reprogram the TCM.

AUDI · 2018-06-27

This bulletin contains repair instructions for when the gearbox malfunction message has appeared with one or more of the following DTCs P176F00, P176E00 or P175E00.

AUDI · 2018-06-13

This bulletin contains repair instructions for when the gearbox malfunction message has appeared with one or more of the following DTCs P176F00, P176E00 or P175E00.