P228D · Comunicados do fabricante

CADILLAC, CHEVROLET, GMC · 2017-03-13

This Technical bulletin provides information on new software for the ECM due to DTC P228D causing the MIL to illuminate.

CADILLAC, CHEVROLET, GMC · 2017-02-10

This Preliminary information communicatesvehicle may come in with DTC P228D (Fuel Pressure Regulator Control Performance - High Pressure) set current or history. A fault with the fuel rail pressure sensor.Do not replace the Engine’s High Pressure Pump. Butrecommended to replace the Fuel Rail Pressure sensor.

CADILLAC, CHEVROLET, GMC · 2017-01-16

This Preliminary Information communication provides information to the technician about vehicles that have Diagnostic Trouble Code P228D. Technician should replace the Fuel Rail Pressure sensor not the High Pressure Pump.

CADILLAC, CHEVROLET · 2016-10-21

16029 - Service Update. The high pressure fuel pump or fuel rail fastener(s) may have been improperly tightened during manufacturing. Fuel could leak from the fuel pump or fuel rail causing the vehicle to go into reduced power mode. If this occurs DTC P228C, P228D or P00C6 will set, causing the Check Engine Light to be illuminated.

CADILLAC, CHEVROLET, GMC · 2015-08-04

This Preliminary Information communication provides information to the technician about vehicles that may have Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Codes P0089, P127C, P127D, P0192, P0193, P228C, P228D, and P006C. Technician should follow published Service Information diagnostics for the Diagnostic Trouble Codes that are stored. If Service Information does not lead to a repair for the concern, the fuel rail pressure sensor should be replaced.

BUICK, CHEVROLET, GMC · 2015-07-03

This Preliminary Information communication provides information to the technician about a service engine soon light on. Technician will find diagnostic trouble codes P0089 and P228D set in the engine control module. This concern could be due to an incorrect intake camshaft or camshaft actuator sprocket. A diagnostic trouble code of P0171 could also set from installing incorrect injectors.

BUICK, CHEVROLET, GMC · 2015-07-01

This Preliminary Information communication provides information to the technician about a service engine soon light on. Technician will find diagnostic trouble codes P0089 and P228D set in the engine control module. This concern could be due to an incorrect intake camshaft or camshaft actuator sprocket. A diagnostic trouble code of P0171 could also set from installing incorrect injectors.

PACCAR · 2015-05-01

PACCAR MX-13 EPA 2013 Engine Unit Pump Failures. Peterbilt Motors Company has determined that vehicles built between March 03, 2014 and December 23, 2014 and manufactured with PACCAR MX-13 EPA 2013 engines, may have been built with defective electronic fuel pumps (part number 1871117) and may present fault codes P0094 and P228D. There are two pumps fwhich individually provide enough flow to operate the engine at approximately 60% load capacity. E114, E117 and FRN 215-2 have been released at the same time with the goal for you to complete as many of these updates as possible in one service event. Please Note that not every campaign applies to every chassis. Review DWWC/SIR for the applicable campaigns for sfpecific chassis. Be prepared to tell a customer how much time you will need to turn…

CADILLAC, CHEVROLET, GMC · 2015-04-10

This Preliminary Information communication provides information to the technician about vehicles that may have Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Codes P0089, P127C, P127D, P0192, P0193, P228C, P228D, and P006C. Technician should follow published Service Information diagnostics for the Diagnostic Trouble Codes that are stored. If Service Information does not lead to a repair for the concern, the fuel rail pressure sensor should be replaced.

LAND ROVER · 2015-04-08

"SITUATION: THE ENGINE MALFUNCTION INDICATOR LAMP (MIL) MAY BE ILLUMINATED WITH DIAGNOSTIC TROUBLE CODES (DTC) P00C6 AND P228D-00 OR P228C-77 STORED IN THE ENGINE CONTROL MODULE (ECM). ADDITIONALLY, THE ENGINE MAY EXPERIENCE ROUGH RUNNING, HARD STARTING, A ROUGH IDLE, OR MISFIRES AND ONE OR MORE MISFIRE DTCS (P0300, P0301, P0302, P0303, P0304, AND P1315) STORED IN THE ECM. CAUSE: THIS MAY BE CAUSED BY AN INTERNAL FAULT WITH THE METERING VALVE IN THE HIGH PRESSURE FUEL PUMP"

JAGUAR · 2015-04-08

"SITUATION: THE ENGINE MALFUNCTION INDICATOR LAMP (MIL) MAY BE ILLUMINATED WITH DIAGNOSTIC TROUBLE CODES (DTC) P00C6 AND P228D-00 OR P228C-77 STORED IN THE ENGINE CONTROL MODULE (ECM). ADDITIONALLY, THE ENGINE MAY EXPERIENCE ROUGH RUNNING, HARD STARTING, A ROUGH IDLE, OR MISFIRES AND ONE OR MORE MISFIRE DTCS (P0300, P0301, P0302, P0303, P0304, AND/OR P1315) STORED IN THE ECM. CAUSE: THIS MAY BE CAUSED BY AN INTERNAL FAULT WITH THE METERING VALVE IN THE HIGH PRESSURE FUEL PUMP."

BUICK, CHEVROLET, GMC · 2014-07-10

This Preliminary Information communication provides information to the technician about a service engine soon light on. Technician will find diagnostic trouble codes P0089 and P228D set in the engine control module. This concern could be due to an incorrect intake camshaft or camshaft actuator sprocket. A diagnostic trouble code of P0171 could also set from installing incorrect injectors.

BUICK, CHEVROLET, GMC · 2014-07-08

This Preliminary Information communication provides information to the technician about a service engine soon light on. Technician will find diagnostic trouble codes P0089 and P228D set in the engine control module. This concern could be due to an incorrect intake camshaft or camshaft actuator sprocket. A diagnostic trouble code of P0171 could also set from installing incorrect injectors.