A relação com um veículo é uma pista. Confirme motor, produção e software na documentação do fabricante.
P26FE ← O que significa este código?10 Resultados
FORD · 2025-04-11
This article supersedes 23-2132 to update the labor times from M-time to M-Time with a limit. Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: * "Exhaust Mode Selection Not Available" messages * Illuminated malfunction indicator lamp (MIL) with diagnostics trouble codes (DTCs) P26C5, P26C6, P26FE, P2BF9, P2BFB, P26C7, P2BF5, P2BF8, P2BFD and/or P2BFA. This may be due to an improperly seated exhaust system.
FORD · 2025-04-11
Some of the vehicles listed in the Model statement above may exhibit one or more of the following conditions that lead to needing to perform the calibration (alignment) procedure on exhaust tailpipe actuators: * An illuminated malfunction indicator lamp (MIL) and an Exhaust mode not available message in the instrument panel cluster (IPC) with diagnostic trouble codes (DTCs) P26FE, P2BFB, P26C5:78, and/or P2BF8:78 stored in the powertrain control module (PCM) * A condition/symptom that requires the installation of an exhaust tailpipe actuator when undergoing normal diagnosis and repair * Exhaust tailpipe actuators failing alignment procedure after installation with parameter identification (PID) "EFCV_A_MON_STAT" and/or PID "EFCV_B_MON_STAT" reading "3" * No audible difference in exhaust…
FORD · 2023-05-04
Some 2018-2023 Mustang vehicles (non-Shelby GT-350) may exhibit various concerns with the active exhaust system. These may include Exhaust Mode Selection Not Available messages, and/or illuminated malfunction indicator lamp (MIL) with diagnostics trouble codes (DTCs) P26C5, P26C6, P26FE, P2BF9, P2BFB, P26C7, P2BF5, P2BF8, P2BFD and/or P2BFA. This may be due to an improperly seated exhaust system. To correct the condition, follow the Service Procedure to diagnose the tailpipe actuator.
FORD · 2022-10-04
Some 2018-2022 Mustang vehicles (non-Shelby GT-350) may exhibit various concerns with the active exhaust system. These may include Drive Mode Not Available or Exhaust Mode Not Available messages, and/or illuminated malfunction indicator lamp (MIL) with diagnostics trouble codes (DTCs) P26C5, P26C6, P26FE, P2BF9, P2BFB, P26C7, P2BF5, P2BF8, P2BFD and/or P2BFA. This may be due to an improperly seated exhaust system. To correct the condition, follow the Service Procedure to diagnose the tailpipe actuator .
FORD · 2022-05-04
This article supersedes TSB 21-2011 to update the vehicle model years affected and Service Procedure. Some 2018-2022 Mustang vehicles may exhibit various concerns with the active exhaust system. These may include Drive Mode Not Available or Exhaust Mode Not Available messages, and/or illuminated malfunction indicator lamp (MIL) with diagnostics trouble codes (DTCs) P26C5, P26C6, P26FE, P2BF9, P2BFB, P26C7, P2BF5, P2BF8, P2BFD and/or P2BFA. This may be due to an improperly seated exhaust system. To correct the condition, follow the Service Procedure to diagnose the tailpipe actuator .
FORD · 2021-03-26
Some 2020 Mustang GT500 vehicles built on or before 28-Aug-2020 may exhibit various concerns with the active exhaust system. These may include "Drive Mode Not Available" or "Exhaust Mode Not Available" messages, and/or diagnostic trouble codes (DTCs) P26C5, P26C6, P26FE, P2BF9, P2BFB, P26C7, P2BF5, P2BF8, P2BFD, and/or P2BFA. This may be due to pinched wiring or a misaligned bracket where the exhaust actuator mounts. To correct the condition, follow the Service Procedure to make sure that the exhaust is seated correctly.
FORD · 2017-10-27
Some 2016-2017 Focus RS vehicles built on or before 02-Aug-2017 may exhibit an Unable to Change Drive Mode message in the instrument panel cluster (IPC) and/or an illuminated malfunction indicator lamp (MIL) with DTC P26FE stored in the powertrain control module (PCM) memory. Reprogram the PCM to the latest calibration using Integrated Diagnostic System (IDS) or Ford J2534 Diagnostic Software (FJDS) release 106.04 or higher. Make sure you are connected to the internet when entering module programming to obtain the latest updates. Calibration files may also be obtained at www.motorcraftservice.com.
FORD · 2017-04-07
Some 2016-2017 Focus RS vehicles built on or before 03-Apr-2017 may exhibit an Unable to Change Drive Mode message in the instrument panel cluster (IPC) and/or an illuminated malfunction indicator lamp (MIL) with DTC P26FE stored in the powertrain control module (PCM) memory. This may be due to a sticking exhaust valve when the temperature is below freezing. Reprogram the PCM to the latest calibration using IDS release 104.05 or higher. Make sure you are connected to the internet when entering module programming to obtain the latest updates. Calibration files may also be obtained at www.motorcraftservice.com
FORD · 2017-01-27
SOME 2016-2017 FOCUS RS VEHICLES MAY EXHIBIT A MESSAGE DISPLAYED IN THE INSTRUMENT PANEL CLUSTER (IPC) THAT STATES DRIVE MODE SELECTION NOT POSSIBLE. DIAGNOSTIC TROUBLE CODE (DTC) P26FE MAY ALSO BE PRESENT IN POWERTRAIN CONTROL MODULE (PCM) MEMORY. DTC P26FE IS SET WHEN THE PCM IS UNABLE TO COMMAND THE TAILPIPE ACTUATOR TO MOVE. THIS CONCERN MAY BE CAUSED BY LOW TEMPERATURES (BELOW FREEZING) WHEN STARTING THE ENGINE. AFTER ABOUT 180 SECONDS, AND A KEY CYCLE, THE SYSTEM WORKS AS DESIGNED. THE ISSUE IS CURRENTLY UNDER ENGINEERING INVESTIGATION, DO NOT ATTEMPT ANY REPAIRS AT THIS TIME. MONITOR OASIS FOR FUTURE UPDATES. FOR ADDITIONAL TAILPIPE ACTUATOR INFORMATION REFER TO WORKSHOP MANUAL (WSM), SECTION 309-00.
FORD · 2016-08-26
SOME 2016 - 2017 MUSTANG SHELBY GT350 VEHICLE MAY EXHIBIT A P26FE DTC WITH DIAGNOSTICS LEADING TO REPLACEMENT OF THE EXHAUST TAILPIPE ACTUATOR. THIS PART WAS NOT INITIALLY RELEASED FOR SERVICE. THIS PART IS NOW AVAILABLE FOR SERVICE AND WORKSHOP MANUAL PROCEDURES ARE NOW AVAILABLE IN SECTION 309-00D. THE SERVICE PART NO. IS FR3Z-5K245-A.