U0287 · Comunicados do fabricante

JEEP · 2026-07-21

Transmission Oil Pump - Service Transmission Message Customers must experience a Malfunction Indicator Lamp (MIL) illumination, and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): ● U0287-00 - Lost Communication With Transmission Fluid Pump Module 1. Customers must also comment on one or more of the following: ● The Engine Stop/Start (ESS) is disabled. ● “Service Transmission” message is displayed on the Instrument Panel Cluster (IPC). This bulletin involves replacement of the Transmission Electric Oil Pump and reprogramming the TCM with the latest available software

JEEP · 2026-06-18

Transmission Auxiliary Oil Pump Failure Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set **one or more the following Diagnostic Troubles Code (DTCs): ● U0287-00 - Lost Communication With Transmission Fluid Pump Module 1.** ● P0B0D-00 - Electric/Auxiliary Transmission Fluid Pump Motor Control Module. Customers may also comment on the following: ● Vehicle is in limp mode. This bulletin involves replacing the transmission oil pump.

HYUNDAI · 2026-02-21

Some Santa Fe (TMA) and Tucson (NX4A) vehicles equipped with a 2.5L GDI engine and 8 speed automatic transmission may have DTC U028700 (Lost Communication With Trans Fluid Pump Module) set by the transmission Electric Oil Pump (EOP). This DTC can cause the Idle Stop & Go (ISG) system to become inoperative. Follow the procedure in this bulletin to replace the Electric Oil Pump on affected vehicles.

JEEP · 2025-04-12

"High Voltage Wiring Repair Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● B273C-00 - Digital Crash Input. ● U0287-00 - Lost Communication With Transmission Fluid Pump Module 1. Customers may also experience one or more of the following: ● Vehicle shakes during a cold start. ● Noise is heard from the underbody near the P2 motor. This bulletin involves repairing the High Voltage (HV) cable harness to the Power Inverter Module (PIM)"

JEEP · 2025-03-22

"High Voltage Wiring Repair Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● B273C-00 - Digital Crash Input. ● U0287-00 - Lost Communication With Transmission Fluid Pump Module 1. Customers may also experience one or more of the following: ● Vehicle shakes during a cold start. ● Noise is heard from the underbody near the P2 motor. REPAIR SUMMARY: This bulletin involves repairing the High Voltage (HV) cable harness to the Power Inverter Module (PIM)"

JEEP · 2025-02-13

Service Hybrid Electric Vehicle System Message Displayed In The IPC. Vehicle Shakes During A Cold Start And Noise Is Heard Near The P2 Motor. DTC’s U0287-00 And B273C-00

JEEP · 2024-07-25

oil pump - electric Please confirm that the connector for the transmission electric oil pump is fully latched in place prior to proceeding with the remaining diagnostic steps. If the DTC U0287 duplicates after securing the electric oil pump connector, please replace the electric oil pump.

JEEP · 2022-09-07

Service Hybrid Electric Vehicle System Message Displayed In The IPC. Vehicle Shakes During A Cold Start And Noise Is Heard Near The P2 Motor. DTC?s U0287-00 And B273C-00