FORD
TSB 25-2144
2025-04-11 · NHTSA 11017055
Связь с автомобилем — отправная точка. Уточняйте двигатель, период выпуска и ПО по данным производителя.
Аннотация производителя
Оригинал на английском
Some of the vehicles listed in the Model statement above may exhibit one or more of the following conditions that lead to needing to perform the calibration (alignment) procedure on exhaust tailpipe actuators: * An illuminated malfunction indicator lamp (MIL) and an Exhaust mode not available message in the instrument panel cluster (IPC) with diagnostic trouble codes (DTCs) P26FE, P2BFB, P26C5:78, and/or P2BF8:78 stored in the powertrain control module (PCM) * A condition/symptom that requires the installation of an exhaust tailpipe actuator when undergoing normal diagnosis and repair * Exhaust tailpipe actuators failing alignment procedure after installation with parameter identification (PID) "EFCV_A_MON_STAT" and/or PID "EFCV_B_MON_STAT" reading "3" * No audible difference in exhaust tone when transitioning between exhaust modes These exhaust tailpipe actuators require alignment after installation. These vehicles may require an update to the PCM prior to attempting exhaust tailpipe actuator alignment.
Материалы NHTSA ↗Группируются только записи с одинаковыми маркой, номером, датой и полным текстом аннотации. Номера и старые документы сохраняются; отмечаются установленные явные замены. Автомобили до 1994 года отделены от обычных результатов. Неуказанный год не означает все годы.