C1034 · Материалы производителя

FORD · 2026-02-12

Some 2021-2022 Mustang Mach-E vehicles may exhibit a "Parking Brake Failure, Service Immediately message displayed in the instrument panel cluster (IPC) and diagnostic trouble codes (DTCs) C2007, C2008, C1034, U0293 and/or U0100 stored in the anti-lock brake system (ABS) module. To correct the condition, follow the technical instructions outlined FSA 22P31 (US) or 22B47 (Canada) for an appropriate repair direction.

VOLVO · 2023-09-07

CBR: Battery Electric Vehicle (BEV) - Diagnostic Trouble Code (DTC) C103412, C103413

FORD · 2023-03-13

Some 2022-2023 F-150 vehicles equipped with single exhaust may have various symptoms relating to parking brake, ABS, Traction Control, AdvanceTrac, Park Aid, and/or Locking Differential functionality. Vehicles may also exhibit one or more of the following DTCs in the ABS module: B1111, C1013, C1034, C2005, C2006, C2007, C2008. This condition may be the result of a wiring harness chafing on the left tube of the rear axle. Visually inspect the wiring harnesses in close proximity to the left axle tube, and if damage is found, repair the affected wiring harness following Wiring Diagram Cell 5.

FORD · 2022-09-20

Some 2020-2022 Mustang Shelby GT500 vehicles may exhibit an intermittent parking brake fault message in the instrument panel cluster (IPC) with diagnostic trouble codes (DTCs) C1034, C2005, C2006, C2007 and/or C2008 stored in the anti-lock brake system (ABS) module and/or a parking brake that sticks after being applied. This may be due to internal binding of the piston within the parking brake caliper. To correct the condition, follow the Service Procedure to replace the parking brake caliper(s).

FORD · 2022-04-22

Some 2021-2022 Mustang Mach-E vehicles built on or before 15-Mar-2022 may exhibit a Parking Brake Fault Service Now message in the instrument panel cluster (IPC) and DTCs C2007, C2008, C1034, U0293 and/or U0100 in the antilock brake system (ABS) module. This may be due to an open/corroded circuit near the rear caliper. To correct the condition, follow the Service Procedure to replace the electronic parking brake (EPB) connector.

FORD · 2017-04-20

Some 2017 Escape vehicles equipped with 17 inch wheels built on or before 10-October-2016 may exhibit an illuminated electric park brake warning indicator with diagnostic trouble codes (DTCs) C1034, C1A43, C2005, C2007, C2008 and/or U2002. Four wheel drive (4WD) vehicles may also exhibit an anti-lock brake system (ABS) lamp illuminated with DTCs C003A or C0037. Follow the Service Procedure steps to correct the condition.

FORD · 2017-01-13

SOME 2017 ESCAPE VEHICLES EQUIPPED WITH 17 INCH WHEELS BUILT ON OR BEFORE 10-OCTOBER-2016 MAY EXHIBIT AN ILLUMINATED ELECTRIC PARK BRAKE WARNING INDICATOR WITH DIAGNOSTIC TROUBLE CODES (DTCS) C1034, C1A43, C2005, C2007, C2008 AND/OR U2002. FOUR WHEEL DRIVE (4WD) VEHICLES MAY ALSO EXHIBIT AN ANTI-LOCK BRAKE SYSTEM (ABS) LAMP ILLUMINATED WITH DTCS C003A OR C0037. FOLLOW THE SERVICE PROCEDURE STEPS TO CORRECT THE CONDITION.

FORD · 2016-12-02

SOME 2017 ESCAPE VEHICLES EQUIPPED WITH 17 INCH WHEELS BUILT ON OR BEFORE 10-OCT-2016 MAY EXHIBIT AN ELECTRIC PARK BRAKE WARNING WITH DIAGNOSTIC TROUBLE CODES (DTCS) C1034, C1A43, C2005, C2007, C2008 AND/OR U2002. 4 WHEEL DRIVE (4WD) VEHICLES MAY ALSO EXHIBIT AN ANTI-LOCK BRAKE SYSTEM (ABS) LIGHT ON WITH DTCS C003A OR C0037. IF A VEHICLE COMES IN FOR THIS CONCERN, INSPECT THE ELECTRIC PARK BRAKE/BRAKE SKID CONTROL WIRING HARNESS (2C055) IN THE REAR ON BOTH SIDES. INSPECT THE HARNESSES FOR DAMAGE WHERE THEY ARE ROUTED CLOSEST TO THE REAR WHEELS. IF DAMAGED, REPAIR AS REQUIRED AND TIE STRAP BOTH HARNESSES TO GAIN SUFFICIENT CLEARANCE AWAY FROM BOTH REAR WHEELS. APPLICABLE LABOR OPERATIONS IN SECTION 10 OF THE SERVICE LABOR TIME STANDARDS (SLTS) MANUAL.

BENTLEY · 2014-12-01

Mulsanne front suspension - control module parameter updates Customer statement / workshop findings: The air suspension warning light (Figure 1) is illuminated and/or event codes C103429 (Front left hand ride height sensor) and C103529 (Front right hand ride height sensor) are present within the air suspension control module. Technical background: The parameters of the front ride height sensors are insufficient, this TPI describes the process which must be followed should the air suspension warning light be evident and/or the suspension control module event codes are logged relating to the front ride height sensors.