Смотреть

P050E · Материалы производителя

Связь с автомобилем — отправная точка. Уточняйте двигатель, период выпуска и ПО по данным производителя.

P050E ← Что означает этот код?

23 Результаты

TSB 22-2151 ↗

FORD · 2022-04-25

Some 2021 F-150 vehicles equipped with a 3.5L PowerBoost engine and built on or before 23-Apr-2021 may experience an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0300, P0301-P0306, P0316, P050E, P1674, P0454 and/or P2451 stored in the powertrain control module (PCM). This may be due to various software parameters within the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM.

TSB 21-2131 ↗

FORD · 2021-04-29

Some 2021 F-150 vehicles equipped with a 3.5L PowerBoost engine and built on or before 23-Apr-2021 may experience an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0300, P0301-P0306, P0316, P050E, P1674, P0454 and/or P2451 stored in the powertrain control module (PCM). This may be due to various software parameters within the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM.

SSM 49573 ↗

FORD · 2021-02-15

Some 2021 F-150 vehicles equipped with a 3.5L PowerBoost engine may experience a rough running engine during idle and an illuminated malfunction indicator lamp (MIL) with diagnostics trouble code (DTC) P0300, P0304, P050E and/or P2451 stored in the powertrain control module (PCM). Inform customers that Ford is developing a calibration software update for the PCM that is expected in March. Let the customer know they can continue to drive the vehicle and schedule a follow-up appointment for repair in April. Once the update becomes available, contact the customer and confirm the service appointment is going forward. Monitor OASIS for updates.

18-069-20 REV. A ↗

RAM · 2020-09-19

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find oneor more of the following Diagnostic Trouble Codes (DTCs):P0133-00 - O2 Sensor 1/1 Slow Response. P20EE-00 - SCR NOX Catalyst Efficiency Below Threshold Bank 1. P050E-00 - Cold Start Engine Exhaust Temperature Too Low. U0402-00 - Implausible Data Received From TCM. P0299-00 - Turbocharger Underboost Condition. P0402-00 - EGR Flow Excessive Detected. P249C-00 - Excessive Time To Enter Closed Loop Reductant Injection Control. P208B-00 - Reductant Pump 1 Control Performance. P20C6-00 - Reductant Heater 4 Control Circuit Performance.…

18-068-20 REV. B ↗

RAM · 2020-09-19

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set:P1D30-00 - Oil Viscosity Too Low. Attempting to clear the DTC P1D30-00 will be unsuccessful. P2453-00 - Diesel Particulate Filter Differential Pressure Sensor Circuit Performance. P0401-00 - EGR Flow Insufficient Detected. P0133-00 - O2 Sensor 1/1 Slow Response. P20EE-00 - SCR NOX Catalyst Efficiency Below Threshold Bank 1. P050E-00 - Cold Start Engine Exhaust Temperature Too Low. P0299-00 - Turbocharger Underboost condition. P0402-00 - EGR Flow Excessive Detected.…

18-068-20 REV. A ↗

RAM · 2020-09-18

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set:P1D30-00 - Oil Viscosity Too Low.Attempting to clear the DTC P1D30-00 will be unsuccessful. P2453-00 - Diesel Particulate Filter Differential Pressure Sensor Circuit Performance. P0401-00 - EGR Flow Insufficient Detected. P0133-00 - O2 Sensor 1/1 Slow Response. P20EE-00 - SCR NOX Catalyst Efficiency Below Threshold Bank 1. P050E-00 - Cold Start Engine Exhaust Temperature Too Low. P0299-00 - Turbocharger Underboost Condition. P0402-00 - EGR Flow Excessive Detected.…

1806820 ↗

RAM · 2020-08-26

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set:P1D30-00 - Oil Viscosity Too Low. Attempting to clear the DTC will be unsuccessful. P2453-00 - Diesel Particulate Filter Differential Pressure Sensor Circuit Performance. P0401-00 - EGR Flow Insufficient Detected. P0133-00 - O2 Sensor 1/1 Slow Response. P20EE-00 - SCR NOX Catalyst Efficiency Below Threshold Bank 1. P050E-00 - Cold Start Engine Exhaust Temperature Too Low. P0299-00 - Turbocharger Underboost Condition. P0402-00 - EGR Flow Excessive Detected. P245B…

1806920 ↗

RAM · 2020-08-26

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs):P0133-00 - O2 Sensor 1/1 Slow Response. P20EE-00 - SCR NOX Catalyst Efficiency Below Threshold Bank 1. P050E-00 - Cold Start Engine Exhaust Temperature Too Low. U0402-00 - Implausible Data Received From TCM. P0299-00 - Turbocharger Underboost Condition. P0402-00 - EGR Flow Excessive Detected. P249C-00 - Excessive Time To Enter Closed Loop Reductant Injection Control. P208B-00 - Reductant Pump 1 Control Performance. P20C6-00 - Reductant Heater 4 Control Circuit Performance.…

1806720 ↗

JEEP · 2020-08-26

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set:P0133-00 - O2 Sensor 1/1 Slow Response. P20EE-00 - SCR NOX Catalyst Efficiency Below Threshold Bank 1. P050E-00 - Cold Start Engine Exhaust Temperature Too Low. P0299 - Turbocharger Underboost Condition. The following software enhancement is available:Calibration to correct the On-Board Diagnostic (OBD) system?s inability to detect and set DTCP0420 - Catalyst Efficiency (Bank 1)when the Diesel Oxidation Catalyst (DOC) is missing.

18-068-20 ↗

RAM · 2020-08-26

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set:P1D30-00 - Oil Viscosity Too Low. Attempting to clear the DTC will be unsuccessful. P2453-00 - Diesel Particulate Filter Differential Pressure Sensor Circuit Performance. P0401-00 - EGR Flow Insufficient Detected. P0133-00 - O2 Sensor 1/1 Slow Response. P20EE-00 - SCR NOX Catalyst Efficiency Below Threshold Bank 1. P050E-00 - Cold Start Engine Exhaust Temperature Too Low. P0299-00 - Turbocharger Underboost Condition. P0402-00 - EGR Flow Excessive Detected. P245B…

18-069-20 ↗

RAM · 2020-08-26

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs):P0133-00 - O2 Sensor 1/1 Slow Response. P20EE-00 - SCR NOX Catalyst Efficiency Below Threshold Bank 1. P050E-00 - Cold Start Engine Exhaust Temperature Too Low. U0402-00 - Implausible Data Received From TCM. P0299-00 - Turbocharger Underboost Condition. P0402-00 - EGR Flow Excessive Detected. P249C-00 - Excessive Time To Enter Closed Loop Reductant Injection Control. P208B-00 - Reductant Pump 1 Control Performance. P20C6-00 - Reductant Heater 4 Control Circuit Performance.…

18-067-20 ↗

JEEP · 2020-08-26

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set:P0133-00 - O2 Sensor 1/1 Slow Response. P20EE-00 - SCR NOX Catalyst Efficiency Below Threshold Bank 1. P050E-00 - Cold Start Engine Exhaust Temperature Too Low. P0299 - Turbocharger Underboost Condition. The following software enhancement is available:Calibration to correct the On-Board Diagnostic (OBD) system?s inability to detect and set DTCP0420 - Catalyst Efficiency (Bank 1)when the Diesel Oxidation Catalyst (DOC) is missing.

1800116REVC ↗

RAM · 2016-05-13

Flash: 3.0L Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience bucking under hard acceleration. In addition customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: · **P206D-00 - Reductant Quality Sensor Circuit High. · P26AB-00 - Engine Coolant Bypass Valve Stuck. · P050E-00 - Cold Start Engine Exhaust Temperature Too Low. · U3017-00 - Control Module Timer/Clock Performance.** · P026A-00 - Charge Air Cooler Efficiency Below Threshold. · P1296-00 - EGR Slow Response - Increasing Flow. · P20C2-00 - Reductant Heater…

18-001-16 REV. C ↗

RAM · 2016-05-13

Flash: 3.0L Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience bucking under hard acceleration. In addition customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: · **P206D-00 - Reductant Quality Sensor Circuit High. · P26AB-00 - Engine Coolant Bypass Valve Stuck. · P050E-00 - Cold Start Engine Exhaust Temperature Too Low. · U3017-00 - Control Module Timer/Clock Performance.** · P026A-00 - Charge Air Cooler Efficiency Below Threshold. · P1296-00 - EGR Slow Response - Increasing Flow. · P20C2-00 - Reductant Heater…

18-018-14 REV. C ↗

JEEP · 2014-07-11

Flash: MIL Illumination - Remote Start, Diagnostic and System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. Some customers may experience a condition that the Remote Start will not start the vehicle in cold 14° F (-10° C) ambient temperatures. Software enhancements will help this issue. Some customers may experience a condition that the Oil Life Monitor shows faster then expected oil life deterioration. Software enhancements will address this issue. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that any of the following Diagnostic Trouble Code(s) may have been set erroneously: ? P0087-00 - FUEL RAIL PRESSURE TOO LOW ?…

18-028-14 REV. A ↗

RAM · 2014-05-03

Flash: MIL Illumination - Diagnostic and System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that any of the following Diagnostic Trouble Code(s) may have been set erroneously: ? ? P0045-00 - TURBOCHARGER BOOST CONTROL CIRCUIT/OPEN ? P0087-00 - FUEL RAIL PRESSURE TOO LOW ? P009A-00 - INTAKE AIR TEMPERATURE / AMBIENT AIR TEMPERATURE CORRELATION ? P0128-00 - THERMOSTAT RATIONALITY ? P0234-00 - TURBOCHARGER OVERBOOST CONDITION ? P0420-00 - CATALYST EFFICIENCY (BANK 1) ? P0426-00 - CATALYST TEMPERATURE SENSOR CIRCUIT PERFORMANCE (BANK 1 SENSOR 1) ? P05F8-00 - REDUCTANT HEATER…

18-018-14 ↗

JEEP · 2014-04-16

Flash: MIL Illumination - Diagnostic and System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. Some customers may experience a condition that the Oil Life Monitor shows faster then expected oil life deterioration. Software enhancements will address this issue. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that any of the following Diagnostic Trouble Code(s) may have been set erroneously: ? P0087-00 - FUEL RAIL PRESSURE TOO LOW ? P0088-00 - FUEL RAIL PRESSURE TOO HIGH ? P016F-00 - CLOSED LOOP FUEL PRESSURE CONTROL AT LIMIT - PRESSURE TOO LOW ? P009A-00 - INTAKE AIR TEMPERATURE / AMBIENT AIR TEMPERATURE CORRELATION ? P0234-00 -…

18-018-14 REV. B ↗

JEEP · 2014-04-16

Flash: MIL Illumination - Diagnostic and System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. Some customers may experience a condition that the Oil Life Monitor shows faster then expected oil life deterioration. Software enhancements will address this issue. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that any of the following Diagnostic Trouble Code(s) may have been set erroneously: ? P0087-00 - FUEL RAIL PRESSURE TOO LOW ? P0088-00 - FUEL RAIL PRESSURE TOO HIGH ? P016F-00 - CLOSED LOOP FUEL PRESSURE CONTROL AT LIMIT - PRESSURE TOO LOW ? P009A-00 - INTAKE AIR TEMPERATURE / AMBIENT AIR TEMPERATURE CORRELATION ? P0234-00 -…

18-028-14 ↗

RAM · 2014-04-10

Flash: MIL Illumination - Diagnostic and System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that any of the following Diagnostic Trouble Code(s) may have been set erroneously: ? ? P0045-00 - TURBOCHARGER BOOST CONTROL CIRCUIT/OPEN ? P0087-00 - FUEL RAIL PRESSURE TOO LOW ? P009A-00 - INTAKE AIR TEMPERATURE / AMBIENT AIR TEMPERATURE CORRELATION ? P0128-00 - THERMOSTAT RATIONALITY ? P0234-00 - TURBOCHARGER OVERBOOST CONDITION ? P0420-00 - CATALYST EFFICIENCY (BANK 1) ? P0426-00 - CATALYST TEMPERATURE SENSOR CIRCUIT PERFORMANCE (BANK 1 SENSOR 1) ? P05F8-00 - REDUCTANT HEATER…

TB011312 ↗

VOLKSWAGEN · 2013-04-29

Update Programming, MIL ON, Faults P0299, P0403, P20EE, P229F, P2100, P0045, P2008, P24AF, P026A, and/or P050E Stored in ECM Fault Memory

TB011303 ↗

VOLKSWAGEN · 2013-01-25

Update Programming MIL ON, DTCs P050E, P2080, P244C and/or P2478 Stored in ECM Fault Memory

V011228 2030453 ↗

VOLKSWAGEN · 2012-10-02

Technical Bulletin (Update Programming for Stored in ECM Fault Memory issues): The MIL ON with NOx Sensor fault P2201 and/or Exhaust Gas Temperature Sensor faults P050E, P2080, P244C and/or P2478 stored in fault memory due to the Diagnostic strategy being to sensitive. The production solution to this issue was Improved software implemented for model year 2013. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.

NTB-11-105-A ↗

NISSAN · 2011-12-14

NISSAN: HAVE A COLD START CONTROL STORED IN ECM IF MIL IS ON WITH DTC P050A AND/OR P050E. IF APPLY TO VEHICLE, NEED TO REPROGRAM ECM. *PE