VOLVO · 2024-06-05
This is a Technical Journal: DIM Message and DTC IHFA-P060300. Download IHFA software.
Связь с автомобилем — отправная точка. Уточняйте двигатель, период выпуска и ПО по данным производителя.
P0603 ← Что означает этот код?27 Результаты
VOLVO · 2024-06-05
This is a Technical Journal: DIM Message and DTC IHFA-P060300. Download IHFA software.
FORD · 2021-09-14
This article supersedes TSB 21-2055 to update the Title, Issue, Action, vehicles affected and production fix date. Some 2020-2021 F-Super Duty vehicles equipped with a 6.7L engine built on or before 10-Feb-2021 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0300-P0308, P0603, P203B, P208B, P208C, P20EE, P2201, P24C2, P27B4, and/or P27B5 stored in the powertrain control module (PCM). The vehicle may also exhibit a forced idle condition. This may be due to various strategies within the PCM software. To correct the condition, follow the Service Procedure to reprogram the PCM.
NISSAN · 2021-04-01
MIL ON WITH DTC P062F AND/OR P0603 STORED IF YOU CONFIRM The MIL is ON and DTC P062F (EEPROM) and/or P0603 (ECM BACK UP/CIRCUIT) is stored, And The customer stated the vehicle was recently started after sitting for an extended period of time (i.e., the battery voltage was low while attempting to start the engine). ACTION 1. Test the vehicle’s 12 volt battery using the Midtronics DSS-5000. Recharge or replace the battery if necessary. 2. Erase all DTCs.
NISSAN · 2021-04-01
MIL ON WITH P0603 STORED FOR ECM BACK UP CIRCUIT This bulletin has been amended. See AMENDMENT HISTORY on page 3. Please discard previous versions of this bulletin.
INFINITI · 2021-04-01
MIL ON WITH DTC P062F AND/OR P0603 STORED IF YOU CONFIRM The MIL is ON and DTC P062F (EEPROM) and/or P0603 (ECM BACK UP/CIRCUIT) is stored, And The customer stated the vehicle was recently started after sitting for an extended period of time (i.e., the battery voltage was low while attempting to start the engine). ACTION 1. Test the vehicle’s 12 volt battery using the Midtronics DSS-5000. Recharge or replace the battery if necessary. 2. Erase all DTCs.
INFINITI · 2021-04-01
MIL ON WITH P0603 STORED FOR ECM BACK UP CIRCUIT This bulletin has been amended. See AMENDMENT HISTORY on page 3. Please discard previous versions of this bulletin.
FORD · 2021-03-04
This article supersedes TSB 20-2336 to update the Title, Issue, Action, vehicles affected and production fix date. Some 2020-2021 F-Super Duty vehicles equipped with a 6.7L engine built on or before 10-Feb-2021 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0300-P0308, P054F, P0603, P203B, P208B, P208C, P20EE, P2201, P24C2, P27B4, and/or P27B5 stored in the powertrain control module (PCM). The vehicle may also exhibit a forced idle condition. This may be due to various strategies within the PCM software. To correct the condition, follow the Service Procedure to reprogram the PCM.
FORD · 2020-09-22
Some 2020 F-Super Duty vehicles equipped with a 6.7L engine built on or before 19-Aug-2020 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0300-P0308, P0603, P203B, P208B, P208C, P2201, P24C2, P27B4, P07F6 and/or P27B5 stored in the powertrain control module (PCM). The vehicle may also exhibit a forced idle condition. This may be due to various strategies within the PCM software. To correct the condition, follow the Service Procedure to reprogram the PCM.
CHEVROLET · 2018-05-03
18089 - Service Update. On certain vehicles equipped with CVT Transmission (RPO MR8), the transmission control module (TCM) does not illuminate the MIL, and does not set the code P0603 (control module long term memory fault), when a memory checksum error identifies there is a malfunction of the Battery Independent Non-Volatile Dynamic Memory (BINVDM). This memory is used to store permanent DTC?s and data used to adapt transmission performance to the unique characteristics of the transmissions. Note: The reason for this software change is not due to incidents of BINVDM malfunctions; rather, it is to ensure that the MIL is illuminated if such malfunctions do occur.
NISSAN · 2018-04-09
MIL ON WITH P0603 STORED FOR ECM BACK UP CIRCUIT This bulletin does NOT apply to Titan equipped with Cummins V8 Diesel engine. This bulletin has been amended to add a NOTE in the Applied Vehicles. No other changes have been made. Please discard previous versions of this bulletin.
NISSAN · 2018-03-26
MIL ON WITH P0603 STORED FOR ECM BACK UP CIRCUIT This bulletin has been amended. The publication date has been revised to include the latest models and model years. No other changes have been made. Please discard previous versions of this bulletin.
NISSAN · 2018-03-26
MIL ON WITH P0603 STORED FOR ECM BACK UP CIRCUIT This bulletin has been amended. The publication date has been revised to include the latest models and model years. No other changes have been made. Please discard previous versions of this bulletin.
NISSAN · 2017-01-04
NISSAN; MIL ON WITH P0603 STORED FOR ECM BACK UP CIRCUIT This bulletin has been amended. The APPLIED VEHICLES section has been revised. No other changes have been made. Please discard previous versions of this bulletin.
INFINITI · 2017-01-04
INFINITI; MIL ON WITH P0603 STORED FOR ECM BACK UP CIRCUIT This bulletin has been amended. The APPLIED VEHICLES section has been revised. No other changes have been made. Please discard previous versions of this bulletin.
INFINITI · 2016-02-22
IF YOU CONFIRM The MIL is "ON" with DTC P0603 (ECM BACK UP/CIRCUIT). ACTION 1. Confirm that the battery voltage is 11 volts, or more, with the ignition ON (engine OFF, not running). 2. Erase DTC 3. Perform DTC confirmation steps in the Service Procedure. 4. Confirm 1st trip DTC P0603 is not stored. NOTE: P0603 is often the result of low battery voltage, discharged battery or battery terminal disconnections. Please see this bulletin for furtner details.
NISSAN · 2016-02-22
IF YOU CONFIRM The MIL is "ON" with DTC P0603 (ECM BACK UP/CIRCUIT). ACTION 1. Confirm that the battery voltage is 11 volts, or more, with the ignition ON (engine OFF, not running). 2. Erase DTC 3. Perform DTC confirmation steps in the Service Procedure. 4. Confirm 1st trip DTC P0603 is not stored. NOTE: P0603 is often the result of low battery voltage, discharged battery or battery terminal disconnections. Please see this bulletin for furtner details.
BUICK, CADILLAC, CHEVROLET, GMC, HUMMER, PONTIAC, SAAB, SATURN · 2015-02-24
This informational bulletin communicates Information to technicians on control module Diagnostic Trouble Code(s) (DTC)(s) P0601, P0602, P0603, P0604, P0606, P062F, P06F3, P1621 which can be shared in multiple modules.
BUICK, CADILLAC, CHEVROLET, GMC, HUMMER, PONTIAC, SATURN · 2014-06-03
This Preliminary Information communication provides information to the technician about vehicle that have a Malfunction Indicator Lamp on. Technician may find Diagnostic Trouble Codes P0601, P0603, P0604, P062F or P1621 stored in the Transmission Control Module. Technician will need to ensure that the Diagnostic Trouble Codes are set in the Transmission Control Module. If the Diagnostic Trouble Codes are only set in the Transmission Control Module reprogram the Transmission Control Module.
AUDI · 2013-02-07
Transmission warning message in cluster (DTC P0603 in TCM)
AUDI · 2013-02-07
Supersedes Technical Service Bulletin Group 02 number 12-02 dated December 6, 2012. Customer may report transmission warning light comes on. No drivability/starting concerns. GFF scan shows fault code: P060300 (Control Module Malfunctioning, Sporadic), stored in the Transmission control module (02). The entry is caused by an overly sensitive diagnosis in the gearbox control unit. This does not affect the driving characteristics.
AUDI · 2012-12-06
Customer may report transmission warning light comes on. No drivability/starting concerns. GFF scan shows fault code- P060300 (Control Module Malfunctioning, Sporadic), stored in the Transmission control module (02). The entry is caused by a too sensitive diagnosis in the gearbox control unit. This does not affect the driving characteristics.
CHEVROLET, GMC · 2011-06-01
BUICK/CHEVROLET/HUMMER/GMC/PONTIAC/CADILLAC/SATURN: TECHNICIANS MAY FIND DTCS P0601, P0603, P0604, P062F OR P1621 STORED IN THE TCM AS AN ACTIVE OR A HISTORY CODE. SOME OF THESE DTCS CAN ALSO BE SET IN THE ECM OR FPCM. MAKE SURE THAT YOU KNOW WHICH MODULE (FOR EXAMPLE ECM, FPCM OR TCM) HAS SET THE DTC BEFORE ATTEMPTING TO DIAGNOSE AND REPAIR THIS CONDITION. *PE UPDATED 8/1/11. *PE
HUMMER, SAAB · 2005-09-01
POWERTRAIN CONTROL MODULE (PCM), ENGINE CONTROL MODULE (ECM), TRANSMISSION CONTROL MODULE (TCM) DIAGNOSTIC TROUBLE CODE(S) (DTC)(S) P0601, P0602, P0603, P0604, P1621 SHARED IN MULTIPLE MODULES. *TT
HONDA · 2004-02-16
DIAGNOSTIC TROUBLE CODE P0603 AFTER ECM/PCM R&R. *NM
FORD · 2004-02-01
MALFUNCTION INDICATOR LAMP (MIL) ON WITH DIAGNOSTIC TROUBLE CODES P0603 (POWERTRAIN CONTROL MODULE KEEP ALIVE MEMORY ERROR) OR P0605 ( POWERTRAIN CONTROL MODULE READ ONLY MEMORY ERROR). *TT
SATURN · 2000-10-01
ON SOME VEHICLES, A DIAGNOSTIC TROUBLE CODE P0603 (PCM LONG TERM MEMORY RESET) MAY BE STORED WHEN BATTERY VOLTAGE IS REMOVED FROM THE PCM WITH IGNITION OFF. *TT
PONTIAC, SATURN ·
SES LIGHT DUE TO INTERNAL ECM DTCS P0603 AND/OR P0604. *KB