P2122 · Материалы производителя

FORD · 2026-07-27

Some 2025-2026 Bronco/Ranger vehicles may exhibit an illuminated powertrain malfunction (wrench) indicator with diagnostic trouble codes (DTC) P2122, P2123, P2127, P2128, and/or P2138 stored in the powertrain control module (PCM). The vehicle may or may not exhibit a perceived lack of power intermittently. This may be due to an issue with the following connectors associated with the accelerator pedal position (APP) sensor circuits: -C115B -C175B -C2040 Replacement of the accelerator pedal may not resolve this concern. Perform a wiggle test of the connectors while the engine is at normal operating temperature. Perform a visual inspection of the connectors as well as a terminal fit test using the appropriately sized flex probe. Repair as necessary. Refer to Wiring Diagram Cell 005. If no…

FORD · 2025-02-12

Some 2023-2025 F-Super Duty vehicles may exhibit an illuminated powertrain malfunction (wrench) indicator with diagnostic trouble codes (DTC) P2122, P2123, P2127, P2128, and/or P2138 stored in the powertrain control module (PCM).

FORD · 2024-10-08

Some 2021-2024 F-150 non-Lightning vehicles may exhibit an illuminated powertrain malfunction (wrench) indicator with diagnostic trouble codes (DTCs) P2122, P2123, P2127, P2128, and/or P2138 stored in the powertrain control module (PCM).

FORD · 2024-04-05

Some 2023-2024 F-Super Duty vehicles may exhibit an illuminated powertrain malfunction (wrench) indicator with diagnostic trouble codes (DTC) P2122, P2123, P2127, P2128, and/or P2138 stored in the powertrain control module (PCM). The vehicle may or may not exhibit a perceived lack of power intermittently. Perform a wiggle test of connector C1580 at the left rear of the engine compartment while the engine is at normal operating temperature. Perform a visual inspection of pins 18 through 29 as well as a terminal fit test using the appropriately sized flex probe. Repair as necessary. Refer to Wiring Diagram Cell 005. If no concerns are found, refer to Workshop Manual (WSM), Section 310-02 for normal diagnostics.

FORD · 2021-10-29

Some 2020-2021 Escape vehicles may exhibit various symptoms due to a loss of voltage reference (VREF) from the 14290 harness above the steering shaft u-joint. Possible symptoms may include an illuminated malfunction indicator lamp (MIL),runs rough, fuse 44 open and may or may not set DTCs P06A7, P0840, P0842, P0845, P0847, P2122, P2127, P0522, P008A, P06A6, P2196, P0192, P0369, P0212, P0340, P0344, P0365, P0532,P0504, P07E4, P06E9, P0369, C175E, C175B, C2302, and/or C0040. Inspect the 14290 harness directly above the steering shaft u-joint near the upper brake pedal mount that may come in contact with the steering shaft. Rotation of the steering wheel may cause the short circuit. If damage is found, repair as necessary and move the harness away from the steering shaft U-joint area and…

FORD · 2021-09-14

Some 2020-2021 Escape vehicles may exhibit a loss of voltage reference (VREF) or runs rough, blow fuse 44 and may or may not set DTC's P06A7,P0840,P0842,P0845,P0847,P2122,P2127,P0522,P008A,P06A6,P2196,P0192, P0212,P0340,P0344,P0365,P0532,P06E9,P0369,C175E,C175B,C2302,P0369. The 14290 harness directly above the steering shaft u-joint near the upper brake pedal mount may come in contact with the steering shaft. Rotation of the steering wheel will trigger the short circuit. Inspect the harness for damage at that location and repair as necessary. If damage was found, move the harness away from the steering shaft U-joint area and secure the harness. Refer to Wiring Diagram Cell 005.

CHEVROLET, GMC · 2021-04-21

This Preliminary information communicates the following issues and directs dealership to inspect the engine harness for shorting. Some customers may comment on any of the following concerns: - SES MIL - No Start - No Crank - Engine runs rough - Reduced engine power - Erratic speedo - Blown Fuse(s): F46UA, F47UA, F51UA, F78UA, F85UA, F86UA, F87UA, and/or F90UA When checking for DTC's any combination may be found: C15AA P001A P2B00 P2B01 P2B03 P2B96 P001B P003D P0107 P018C P01E5 P01E6 P01E7 P0237 P0340 P0341 P0355 P0365 P037C P03F0 P0521 P0522 P0532 P0616 P077C P07BF P0707 P1101 P112F P146D P159F p16A0 p16A2 P171B P2122 P26E5 P2812 P2814 P2B53 P2C05 P2C08 P2C09 P2C0C P2C0D P2C10 P2C12 P2C15 P2C16 P2C19 P305E P3084 P3089 P308E P3093 P3094 P3095 P3098 P30B0 P30B3 P30CF U0073 U0100 U0101 U0140…

CHEVROLET, GMC · 2020-03-24

This Preliminary information communicates the following issues and directs dealership to inspect the engine harness for shorting. Some customers may comment on any of the following concerns: - SES MIL - No Start - No Crank - Engine runs rough - Reduced engine power - Erratic speedo - Blown Fuse(s): F46UA, F47UA, F51UA, F78UA, F85UA, F86UA, F87UA, and/or F90UA When checking for DTC's any combination may be found: C15AA P001A P2B00 P2B01 P2B03 P2B96 P001B P003D P0107 P018C P01E5 P01E6 P01E7 P0237 P0340 P0341 P0355 P0365 P037C P03F0 P0521 P0522 P0532 P0616 P077C P07BF P1101 P112F P146D P159F p16A0 p16A2 P171B P2122 P26E5 P2812 P2814 P2B53 P2C05 P2C08 P2C09 P2C0C P2C0D P2C10 P2C12 P2C15 P2C16 P2C19 P305E P3084 P3089 P308E P3093 P3094 P3095 P3098 P30B0 P30B3 P30CF U0073 U0100 U0101 U0140 U0644…

RAM · 2020-02-26

PEDAL, Accelerator (APPS) Before replacing accelerator pedal for P061B, make sure all PCM software service bulletins and recalls are up to date, if applicable. Before replacing accelerator pedal for other DTCs, be sure to follow fault code diagnostic procedures in Service Library and be sure to check wiring and connectors. P2122 and P2127 will set if accelerator pedal connector is disconnected during diagnosis. Make sure codes are active before replacing pedal. DTC P2299 is usually caused by a two footed driver and acceleartor pedal should not be replaced for this fault if driving style is confirmed with the customer.

CHRYSLER · 2020-02-26

PEDAL, Accelerator Before replacing accelerator pedal, be sure to follow fault code diagnostic procedures in Service Library and be sure to check wiring and connectors. P2122 and P2127 will set if accelerator pedal connector is disconnected during diagnosis. Make sure codes are active before replacing pedal. DTC P2299 is usually caused by a two footed driver and accelerator pedal should not be replaced for this fault if driving style is confirmed with the customer.

CHEVROLET, GMC · 2019-09-27

This Preliminary information communicates the following issues and directs dealership to inspect the engine harness for shorting. Some customers may comment on any of the following concerns: - SES MIL - No Start - No Crank - Engine runs rough - Reduced engine power - Erratic speedo - Blown Fuse(s): F46UA, F47UA, F51UA, F78UA, F85UA, F86UA, F87UA, and/or F90UA When checking for DTC's any combination may be found: C15AA P001A P2B00 P2B01 P2B03 P2B96 P001B P003D P0107 P018C P01E5 P01E6 P01E7 P0237 P0340 P0341 P0355 P0365 P037C P03F0 P0521 P0522 P0532 P0616 P077C P07BF P1101 P112F P146D P159F p16A0 p16A2 P2122 P26E5 P2812 P2814 P2B53 P2C05 P2C08 P2C09 P2C0C P2C0D P2C10 P2C12 P2C15 P2C16 P2C19 P305E P3084 P3089 P308E P3093 P3094 P3095 P3098 P30B0 P30B3 P30CF U0073 U0100 U0101 U0140 U0644 U0672

CHEVROLET, GMC · 2019-08-26

This Preliminary information communicates the following issues and directs dealership to inspect the engine harness for shorting. Some customers may comment on any of the following concerns: - SES MIL - No Start - No Crank - Engine runs rough - Reduced engine power - Erratic speedo - Blown Fuse(s): F46UA, F47UA, F51UA, F78UA, F85UA, F86UA, F87UA, and/or F90UA When checking for DTC's any combination may be found: C15AA P001A P2B00 P2B01 P2B03 P2B96 P001B P003D P0107 P018C P01E5 P01E6 P01E7 P0237 P0340 P0341 P0355 P0365 P037C P03F0 P0521 P0522 P0532 P0616 P077C P07BF P1101 P112F P146D P159F p16A0 p16A2 P2122 P26E5 P2812 P2814 P2B53 P2C05 P2C08 P2C09 P2C0C P2C0D P2C10 P2C12 P2C15 P2C16 P2C19 P305E P3084 P3089 P308E P3093 P3094 P3095 P3098 P30B0 P30B3 P30CF U0073 U0100 U0101 U0140 U0644 U0672

CHEVROLET, GMC · 2019-04-29

This Preliminary information communicates the following issues and directs dealership to inspect the engine harness for shorting. Some customers may comment on any of the following concerns: - SES MIL - No Start - No Crank - Engine runs rough - Reduced engine power - Erratic speedo When checking for DTC's any combination may be found: P001A P2B00 P2B01 P2B03 P2B96 P001B P003D P0107 P018C P01E5 P01E6 P01E7 P0237 P0340 P0341 P0355 P0365 P037C P03F0 P0521 P0522 P0532 P0616 P077C P07BF P1101 P112F P146D P159F p16A0 p16A2 P2122 P26E5 P2812 P2814 P2B53 P2C05 P2C08 P2C09 P2C0C P2C0D P2C10 P2C12 P2C15 P2C16 P2C19 P305E P3084 P3089 P308E P3093 P3094 P3095 P3098 P30B0 P30B3 P30CF U0100 U0101 U0140 U0644 U0672

FORD · 2018-11-08

Some 2018-2019 F-Super Duty vehicles equipped with a 6.7L engine built on 1-Dec-2017 and through 1-Aug-2018 may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P2122, P2127, U0401, U0109, P0480, P008A, P025C, P027A and/or P064A. This may be due to powertrain control module (PCM) connector C1232B not being properly seated to the PCM.

FORD · 2018-07-26

Some 2018 F-Super Duty vehicles equipped with a 6.7L engine built on 1-Dec-2017 and through 8-Jul-2018 may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P2122, P2127, U0401, U0109, P0480, P008A, P025C, P027A and/or P064A. This may be due to powertrain control module (PCM) connector C1232B not being properly seated to the PCM.

FORD · 2017-10-23

Some 2017 F-Super Duty vehicles built on or before 28-Aug-2017, may exhibit an intermittent loss of throttle pedal response, illuminated wrench, hill descent, airbag, anti-lock brake system (ABS) and/or advanced trac warning indicators and/or P2122, P2123, P2124, P2125, P2127, P2128, and/or P2138 DTCs. This may be caused by the Accelerator Pedal Position (APP) sensor 14A005 harness being improperly routed behind the brake booster to brake pedal bracket. If the harness is improperly routed, loosen the bracket to free the harness, refer to Workshop Manual (WSM), section 206-06 and inspect for any damaged circuits. If the harness is properly routed, proceed with normal diagnostics.

FORD · 2017-09-20

Some 2015-2017 F-150 vehicles may experience intermittent loss of throttle pedal response, illuminated wrench, hill descent, airbag, anti lock brake system(ABS) and/or advanced trac warning indicators and/or P2122, P2123, P2124, P2125, P2127, P2128 and/or P2138 DTCs. This may be caused by the Accelerator Pedal Position (APP) Sensor 14A005 harness being improperly routed behind the brake booster to brake pedal bracket. If the harness is improperly routed, loosen the bracket to free the harness, refer to Workshop Manual (WSM), Section 206-06. Inspect and repair damaged circuits before properly routing the harness. If the harness is properly routed, proceed with normal diagnostics.

ALFA ROMEO, CHRYSLER, DODGE, FIAT, JEEP, RAM, SRT · 2017-06-14

Accelerator Pedal Before replacing accelerator pedal, be sure to follow fault code diagnostic procedures in service manual. Make sure to check wiring and connectors. P2122 and P2127 will set if accelerator pedal connector is disconnected during diagnosis. Make sure codes are active before replacing pedal. DTC P2299 is usually caused by a two footed driver and accelerator pedal should not be replaced for this fault.

ALFA ROMEO, CHRYSLER, DODGE, FCA, FIAT, JEEP, RAM, SRT · 2017-06-14

Accelerator Pedal Before replacing accelerator pedal, be sure to follow fault code diagnostic procedures in service manual. Make sure to check wiring and connectors. P2122 and P2127 will set if accelerator pedal connector is disconnected during diagnosis. Make sure codes are active before replacing pedal. DTC P2299 is usually caused by a two footed driver and accelerator pedal should not be replaced for this fault.

MAZDA · 2017-01-13

Check engine light (with DTCs P0101, P061B, P2122, P2138) may illuminate after PCM reprogramming due to a mislogic detection in the PCM calibration, available in the current IDs version 103.03. Please uninstall IDS and install version 103.00 to prevent this situation and "do not update ids until further notice"

FORD · 2016-12-09

SOME 2014-2016 TRANSIT CONNECT VEHICLES EQUIPPED WITH THE 2.5L ENGINE MAY EXHIBIT A CONSTANT OR INTERMITTENT ILLUMINATED MIL WITH VARIOUS DRIVABILITY ISSUES AND ONE OR MORE OF THE FOLLOWING DTCS: P0010, P0103, P0104, P0122, P0131, P0135, P0137, P0141, P0201-P0204, P0217, P0222, P0223, P025A, P0300, P0301-P0304, P0316, P0351-P0354, P0400, P0403, P0443, P1285, P1289, P128A, P1299, P2101, P2107, P2111, P2112, P2122, P2127 AND/OR U0109. FOLLOW THE SERVICE PROCEDURE STEPS TO CORRECT THE CONDITION.

FORD · 2016-10-19

SOME 2015-2016 F-150 VEHICLES MAY EXPERIENCE INTERMITTENT LOSS OF THROTTLE PEDAL RESPONSE, ILLUMINATED WRENCH, HILL DESCENT, AIRBAG, ANTI LOCK BRAKE SYSTEM(ABS) AND/OR ADVANCED TRAC WARNING INDICATORS AND/OR P2122, P2123, P2124, P2125, P2127, P2128 AND/OR P2138 DTCS. THIS MAY BE CAUSED BY THE ACCELERATOR PEDAL POSITION (APP) SENSOR 14A005 HARNESS BEING IMPROPERLY ROUTED BEHIND THE BRAKE BOOSTER TO BRAKE PEDAL BRACKET. IF THE HARNESS IS IMPROPERLY ROUTED, LOOSEN THE BRACKET TO FREE THE HARNESS. INSPECT AND REPAIR DAMAGED CIRCUITS BEFORE PROPERLY ROUTING THE HARNESS. IF THE HARNESS IS PROPERLY ROUTED, PROCEED WITH NORMAL DIAGNOSTICS IN THE WORKSHOP MANUAL (WSM).

CHRYSLER · 2016-01-20

Accelerator Pedal Before replacing accelerator pedal, be sure to follow fault code diagnostic procedures in service manual. Make sure to check wiring and connectors. P2122 and P2127 will set if accelerator pedal connector is disconnected during diagnosis. Make sure codes are active before replacing pedal. DTC P2299 is usually caused by a two footed driver and accelerator pedal should not be replaced for this fault.

CADILLAC, CHEVROLET, GMC · 2015-10-29

This Preliminary Information communication provides information to the technician about vehicles that may have Service Engine Soon Malfunction Indicator Lamp on or reduced power message. Technician may find Diagnostic Trouble Codes P0106, P0107, P0697, P2122, P2123, P2127, P2128 and P2138. Technician should follow published Service Information diagnostics for the Diagnostic Trouble Codes that have set, if it is inconclusive inspect the wiring harness near the left instrument panel junction block. Technician will need to repair the damaged wiring.

CADILLAC, CHEVROLET, GMC · 2014-07-16

This Preliminary Information communication provides information to the technician about vehicles that may have a Service Engine Soon Malfunction Indicator Lamp on or reduced engine power message. Technician may find Diagnostic Trouble Codes P2120, P2122, P2123, P2125, P2127, P2128, and/or P2138. Technician will need to inspect the Accelerator Pedal Position circuits for poor terminal tension.

FORD · 2014-01-01

FORD: IN BATTERY JUNCTION BOX, IS A DAMAGED OR AN IMPROPERLY SEATED CONNECTOR, CAUSING CHECK ENGINE LIGHT TO ILLUMINATE, WITH DIAGNOSTIC TROUBLE CODES (DTCS) P2122, P2127 AND/OR 02138. MODEL 2012-2013 FOCUS, 2013 ESCAPE. *PE

HINO · 2013-07-03

13-004 CORRECTION OF 2013MY WORKSHOP MANUAL. There are two different troubleshooting methods for DTC P2122, P2123, P2127 and P2128 in the the workshop manual. (One is the check sheet type, and the other one is the flow chart.) The troubleshooting methods of the check sheet type for these DTCs are insufficient. Therefore, please refer the troubleshooting ?flow chart? when you perform trouble diagnosis for these DTCs. Please refer to the page 2/3-3/3 for the details.

CHEVROLET · 2013-04-19

This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on and an open Fuse F12DA 20 amp open. Technician will find Diagnostic Trouble Codes P06A3, P2122, P2635, and U18A2.Tech will inspect for the main engine wire harness making contact with the right rear corner of the engine or cam/valve cover. Technician should repair the affected circuit, wrap the harness with additional protective tape and route the harness away from suspect areas of engine component contact.

CHEVROLET · 2013-03-15

This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on and an open Fuse F12DA 20 amp open. Technician will find Diagnostic Trouble Codes P06A3, and P2122. Technician will inspect for the main engine wire harness making contact with the right rear corner of the engine or cam/valve cover. Technician should repair the affected circuit, wrap the harness with additional protective tape and route the harness away from suspect areas of engine component contact.

CADILLAC · 2013-02-01

This Preliminary Information communication provides information to the technician about vehicles that have Service Stabilitrak Message being displayed in the driver?s information center. Technician may find Diagnostic Trouble Code P1153, P1133, P1826, P1827, P2120, P2122, P2123, P2125, P2127, P2128, and P2138. Technician will need to inspect X104 to be rubbing on the cylinder head. Technician will repair any damaged wires and reroute the wire harness.