BENTLEY · 2026-07-17
Fuel pressure regulator - DTC P242200 with symptom code 14536 evident within address 0001. Customer statement: The warning lamp for the emission control system is displayed within the DIP
Связь с автомобилем — отправная точка. Уточняйте двигатель, период выпуска и ПО по данным производителя.
P2422 ← Что означает этот код?29 Результаты
BENTLEY · 2026-07-17
Fuel pressure regulator - DTC P242200 with symptom code 14536 evident within address 0001. Customer statement: The warning lamp for the emission control system is displayed within the DIP
PORSCHE · 2026-01-17
Technical information for Malfunction Indicator Light Active/Fault Memory Entry regarding Tank Shut-Off Valve Tank Ventilation System “P242100” or “P242200” in DME Control Unit
MAZDA · 2025-12-17
Some vehicles may experience the CHECK ENGINE light ON with one of the following DTCs or a combination of these DTCs. P0451 • P2422 • P2451 • P0441 • This may be caused by a concern with the fuel pressure sensor or shutter valve operation.
BENTLEY · 2025-12-11
Fuel pressure regulator - DTC P242200 with symptom code 14536 evident within address 0001. Customer statement: The warning lamp for the emission control system is displayed within the DIP
PORSCHE · 2025-03-27
Technical Information - Malfunction Indicator Light Active / Fault Memory Entry "P242100" or "P242200" in DME Control Unit: Observe Guided Troubleshooting (10 / 25)
BENTLEY · 2025-02-22
Fuel pressure regulator - DTC P242200 with symptom code 14536 evident within address 0001.
BENTLEY · 2023-10-12
Fuel pressure regulator - DTC P242200 with symptom code 14536 evident within address 0001 Customer Statement: The warning lamp for the emission control system is displayed within the DIP
KIA · 2023-07-05
VOLUNTARY EMISSIONS SERVICE CAMPAIGN: FUEL FILLER NECK VENT COLLAR INSPECTION & REPLACEMENT (SC268) - This bulletin provides information to inspect and, if necessary, replace the fuel filler neck vent collar on certain 2023MY Sportage (NQ5a) vehicles produced from November 17, 2022 through January 18, 2023. The affected vehicles may exhibit a MIL ‘ON” with DTC(s) P242200 and/or P242273 due to a partially blocked fuel filler tube vent collar port.
BENTLEY · 2022-11-03
Fuel Pressure regulator- DTC P242200 with symptom code 14536 evident within address 0001 Workshop Findings: -DTC P242200 with symptom code 14536 - EVAP System Vent Valve Stuck Closed - DTC evident in Engine Control Module Address 0001
HONDA · 2022-08-30
Service bulletin - The MIL is on with DTC P2422 (EVAP canister vent shut valve stuck closed malfunction). Dirt may be clogging the EVAP canister vent tube.
HONDA · 2022-07-22
Service bulletin - The MIL is on with DTC P2422 (EVAP canister vent shut valve stuck closed malfunction). Dirt may be clogging the EVAP canister vent tube.
HONDA · 2022-06-30
Service bulletin - The MIL comes on with DTC P2422 (EVAP canister vent shut valve stuck closed malfunction). Dirt may be clogging the EVAP canister vent tube.
HONDA · 2022-05-06
Service bulletin - The MIL comes on with DTC P2422 (EVAP canister vent shut valve stuck closed malfunction). Dirt may be clogging the EVAP canister vent tube.
HONDA · 2022-04-05
Service bulletin - The MIL comes on with DTC P2422 (EVAP canister vent shut valve stuck closed malfunction). Dirt may be clogging the EVAP canister vent tube.
VOLKSWAGEN · 2022-03-29
Customer states rattle noise from the underbody heat shields Customer states coolant leak Oil level sensor leaking Customer states MIL-on, fault P2422 stored in ECM Customer states front brake noise Customer states blower stays on Customer states cannot set seat memory Customer states cannot set seat memory Any TDI within the vehicle/MY range
HONDA · 2022-03-01
Service Bulletin - The MIL comes on with DTC P2422 (EVAP canister vent shut valve stuck closed malfunction).
BENTLEY · 2022-02-11
Fuel pressure regulator - DTC P242200 with symptom code 14536 evident within address 0001. Customer statement / workshop findings Customer statement: The warning lamp for the emission control system is displayed within the DIP Workshop findings: DTC P242200 with Symptom Code 14536 - EVAP System Vent Valve Stuck Closed - DTC evident in Engine Control Module Address 0001. Measure VERY IMPORTANT: The following repair work MUST only be conducted by suitably qualified personal 1) Referring to Rep.Gr 20 - Replace the Pressure regulator assembly and associated components 2) Conduct a road test in EV Mode and/or Hybrid drive mode where possible 3) On return from road test - Check to confirm the issue is resolved and DTC P242200 is not evident within address 0001
HYUNDAI · 2021-02-11
This bulletin provides information related to an Electronic Control Module (ECM) software update which revises detection logic for DTC P2422: EVAP System Restricted Vent Valve logic.
HONDA · 2020-08-05
Service Bulletin - The MIL comes on with DTC P2422 (EVAP canister vent shut valve stuck closed malfunction).
HONDA · 2020-03-03
Service Bulletin - The MIL is on with DTC P2422 (EVAP canister vent shut valve stuck closed malfunction).
KIA · 2018-12-05
PITSTOP - DTC P0449 VENT VALVE/SOLENOID CIRCUIT & P2422 VENT VALVE STUCK CLOSED - This bulletin has been revised - When addressing a concern related to P0449 (Evaporative Emission System ? Vent Valve / Solenoid Circuit) or P2422 (Evaporative Emission System Vent Valve Stuck Closed) on 2017MY~ Sportage (QL) model vehicles, and the Canister Closed Valve (CCV) and corresponding circuit were found to be within specifications, it may be necessary to inspect for flow restrictions within the EVAP ventilation system. If a foreign object is found anywhere from the filler neck to the main charcoal canister, such as a spider nest (A), the object will need to be removed with a pipe cleaner. Trying to clear the hose with compressed air has proven to be ineffective and should not be done. The most…
HONDA · 2017-02-17
Service bulletin - The MIL is on with DTC P2422 (EVAP canister vent shut valve stuck closed malfunction). Dirt may be clogging the EVAP canister vent tube.
HONDA · 2016-10-21
"TECHLINE SUMMARY ARTICLE - WE’RE AWARE THAT WHEN DRIVING REGULARLY ON DIRT ROADS IN VERY DRY AND DUSTY CONDITIONS, THERE CAN BE REPEATED OCCURRENCES OF THE MIL COMING ON WITH DTC P2422 (EVAP CANISTER VENT SHUT VALVE STUCK CLOSED MALFUNCTION). WE’RE WORKING ON AN IMPROVED REPAIR METHOD THAT WE’LL BE POSTING IN AN UPDATED BULLETIN. IN THE MEANTIME, IF YOU GET A NON-HYBRID ACCORD IN FOR THIS CONCERN, KEEP REDOING THE CURRENT S/B 15-010, MIL COMES ON WITH DTC P2422. IF IT’S AN ACCORD HYBRID (NON-PLUG-IN), REPLACE THE CANISTER SET AND CANISTER VENT TUBE. THESE ARE THE CURRENT REPAIR METHODS."
HONDA · 2016-07-16
"TECHLINE SUMMARY ARTICLE - WE’RE AWARE THAT WHEN DRIVING REGULARLY ON DIRT ROADS IN VERY DRY AND DUSTY CONDITIONS, THERE CAN BE REPEATED OCCURRENCES OF THE MIL COMING ON WITH DTC P2422 (EVAP CANISTER VENT SHUT VALVE STUCK CLOSED MALFUNCTION). WE’RE WORKING ON AN IMPROVED REPAIR METHOD THAT WE’LL BE POSTING IN AN UPDATED BULLETIN."
HONDA · 2016-05-12
SERVICE BULLETIN - DTC P2422 MAY APPEAR WHEN DIRT CLOGS THE EVAP CANISTER VENT TUBE.
HONDA · 2015-12-03
SERVICE BULLETIN - THE MIL IS ON WITH DTC P2422 (EVAP CANISTER VENT SHUT VALVE STUCK CLOSED MALFUNCTION). DIRT MAY BE CLOGGING THE EVAP CANISTER VENT TUBE.
HONDA · 2015-02-01
Service bulletin - The MIL is on with DTC P2422 (EVAP canister vent shut valve stuck closed malfunction). Dirt may be clogging the EVAP canister vent tube.
KIA · 2013-02-18
PITSTOP: SORENTO (XM) WITH DTC CODES P0449 OR P2422 - SOME SORENTO (XM) VEHICLES MAY SET A DTC FLOW P0449 OR P2422 WHICH MAY BE CAUSED BY SPIDER WEBS IN AND AROUND THE EVAPORATIVE EMISSIONS VENT LINES CREATING THE SET DTC. TO REPAIR THIS CONDITION, INSPECT THE AIR FILTER ASSEMBLY (LOCATED ON THE CCV) AND THE EVAPORATIVE EMISSIONS VENT LINES FOR SPIDER WEBS OR DEBRIS BEFORE REPLACING ANY COMPONENTS. THE SPIDER WEBS NEEDS TO BE CLEARED FROM THE LINES WITH A PIPE CLEANER, WIRE OR REPLACEMENT OF THE RESTRICTED COMPONENT (BLOWING COMPRESSED AIR THROUGH THE LINES IS OFTEN INEFFECTIVE).
HONDA · 2012-05-11
HONDA: MIL COMES ON WITH DTC P1454 AND/OR P2422. THE FUEL TANK PRESSURE(FTP) SENSOR VENT END JOINT MAY HAVE BEEN INSTALLED UPSIDE DOWN, CAUSING MOISTURE TO ENTER AND BLOCK THE VENT. *JS