U1011 · Материалы производителя

FORD · 2025-07-25

This article supersedes TSB 21-2245 to update labor times from M-time to AP-time and add a cap. Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: * "Stop Safely Now" message in the instrument panel cluster (IPC) * Illuminated powertrain malfunction (wrench) indicator with diagnostic trouble codes (DTCs) P1A10, U0293 and/or U1011 * Loss of power This may be due to the parameters in the powertrain control module (PCM).

AUDI · 2025-04-14

This TSB provides information when the 12V battery is discharged/drive system not activated/keyless opening is inoperatble; DTCs U101100, B1802F1, U140A00, U140000, B10CD00.

AUDI · 2025-03-06

This TSB provides information when the 12V battery is discharged/drive system not activated/keyless opening is inoperatble; DTCs U101100, B1802F1, U140A00, U140000, B10CD00.

BENTLEY · 2021-10-28

Customer statement: Drivers Information panel (DIP) goes blank -Once blank no information is visible within the DIP -No error messages are shown within the DIP Workshop findings: DTC U101100 evident within address 09 - DIP Unrecoverable due to low voltage

FORD · 2021-08-03

Some 2021 Mustang Mach-E vehicles built on or before 20-Mar-2021 may exhibit a loss of power, Stop Safely Now message in the instrument panel cluster (IPC), and illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P1A10, U0293 and/or U1011. This may be due to the parameters in the powertrain control module (PCM). To correct the condition, follow the Service Procedure to reprogram various modules starting with the PCM.

AUDI · 2014-04-03

Vehicle does not start, battery flat DTC stored (DTC U101100)

AUDI · 2014-04-03

Customer may report that the vehicle does not start due to a discharged battery. DTC U101100 (supply voltage too low) is stored in the gateway, J533 (address word 19), and/or the electronic parking brake (EPB) control module. According to the test plan "19-Read Data Bus Keep-Awake Manager", the EPB control module kept the data bus active for prolonged periods of time. The EPB switch appears to be permanently operating (applying or releasing the parking brake) due to an internal mechanical issue or because it is jammed or blocked by debris or by a foreign object.

AUDI · 2014-03-31

Supersedes Technical Service Bulletin Group 97 number 14-41 dated March 18, 2014. The MIL is on. Vehicle will not start. DTC P068A00 is stored in the engine control module (ECM), J623 (address word 01). Numerous unrelated DTCs are also stored in the system, including: P056200, P057100, P068700, P068A00, P162400, P190C00, U010000, U010100, U012100, U014600, U015500, U021200, U101100, U102600, U111100, U111300, U140000, VAG00003, VAG00185, VAG00263, VAG00317, VAG00384, VAG00446, VAG00456, VAG00457, VAG00466, VAG00473, VAG00532, VAG00565, VAG00591, VAG00714, VAG00819, VAG00955, VAG01217, VAG01299, VAG01314, VAG01315, VAG01317, VAG01320, VAG01330, VAG01331, VAG01332, VAG01334, VAG01333, VAG01336, VAG01705, VAG01964, VAG02067, VAG02072, VAG02095, VAG02103, VAG02203, VAG02214, VAG02635,…

AUDI · 2014-03-07

Vehicle does not start, battery flat DTC stored (DTC U101100)

AUDI · 2014-03-07

Supersedes Technical Service Bulletin Group 46 number 13-48 dated July 18, 2013. Customer may report that the vehicle does not start due to a discharged battery. DTC U101100 (supply voltage too low) is stored in the gateway, J533 (address word 19), and/or the electronic parking brake (EPB) control module, J540 (address word 53). According to the test plan "19-Read Data Bus Keep-Awake Manager", the EPB control module kept the data bus active for prolonged periods of time. The EPB switch appears to be permanently operating (applying or releasing the parking brake) due to an internal mechanical issue or because it is jammed or blocked by debris or by a foreign object. Test plan "19-Read Data Bus Keep-Awake Manager" identifies the EPB control module as keeping the data bus active for…

AUDI · 2013-07-18

Supersedes Technical Service Bulletin Group 53 number 13-02 dated July 11, 2013. Customer may report that the vehicle does not start due to a discharged battery. DTC U101100 (supply voltage too low) is stored in the gateway, J533 (address word 19), and/or the electronic parking brake (EPB) control module, J540 (address word 53). According to the test plan "19-Read Data Bus Keep-Awake Manager", the EPB control module kept the data bus active for prolonged periods of time. The EPB switch appears to be permanently operating (applying or releasing the parking brake) due to an internal mechanical issue or because it is jammed or blocked by debris or by a foreign object. Test plan "19-Read Data Bus Keep-Awake Manager", identifies the EPB control module as keeping the data bus active for…

AUDI · 2013-07-11

Customer may report that the vehicle does not start due to a discharged battery. DTC U101100 (supply voltage too low) is stored in the gateway, J533 (address word 19), and/or the electronic parking brake (EPB) control module, J540 (address word 53). According to the test plan "19-Read Data Bus Keep-Awake Manager", the EPB control module kept the data bus active for prolonged periods of time. The EPB switch appears to be permanently operating (applying or releasing the parking brake) due to an internal mechanical issue or because it is jammed or blocked by debris or by a foreign object. Test plan "19-Read Data Bus Keep-Awake Manager", identifies the EPB control module as keeping the data bus active for prolonged periods of time.

FORD · 2013-04-29

FORD: DUE TO DIAGNOSTICS CODE (DTC) P061A AND/OR (U1011), SOME VEHICLES MAY EXHIBIT ILLUMINATION OF RED TRIANGLE LAMP OR WRENCH LAMP OR BOTH IN TRANSMISSION CONTROL MODULE (TCM) OR POWERTRAIN CONTROL MODULE (PCM) AND/OR P060C. MODEL 2013 C MAX. *PE