CADILLAC

PIC5460B

2016-03-14 · NHTSA 10113930

车型关联可作为查阅线索；具体发动机、生产范围和软件条件请核对厂商资料。

厂商摘要

以下为英文原文

This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles with a no crank concern or they are unable to remove their key from the ignition lock cylinder may find Diagnostic Trouble Codes P0318, P1629, U1040, U1064, U1153, U1192, and U1300 stored in the Engine Control Module. Other Class 2 modules may have a U0100 and/or U1000 code stored. These concerns may be caused by an Ignition 1 Power Feed (circuit 5290) or Class 2 (circuit 1807) wiring concern to the Engine Control Module. If the electrical center ignition relay feedback parameter in the Engine Control Module is not battery voltage, measure the voltage at the Engine Control Module fuse in the under-hood fuse block. If voltage is less than battery voltage, check to make sure the Power Control Module is turning the relay on via circuit 5069. If there is battery voltage at the Engine Control Module fuse, check Ignition 1 (circuit 5290) between the fuse and the Engine Control Module. If Ignition 1 (circuit 5290) to the Engine Control Module checks ok, check for a possible open in the Class 2 (circuit 1807) to the Engine Control Module. If all connections and wiring are OK, suspect a possible relay or an ECM concern.

仅当厂商、通报编号、发布日期和完整摘要一致时，重复登记才会合并展示，原始编号仍予保留。旧资料继续供查阅；确认明确替代关系后才标示后续版本。1994 年以前的车辆关联与默认结果分开显示；未注明年款不等于适用于所有年款。