CHEVROLET, GMC

PIP5141G

2015-04-23 · NHTSA 10114483

车型关联可作为查阅线索；具体发动机、生产范围和软件条件请核对厂商资料。

厂商摘要

以下为英文原文

This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have a Diagnostic Trouble Code P06DD with no drivability concerns. Technician will check for other Diagnostic Trouble Codes. If P06DA, P06DB, and P06DC are not set with the P06DD technician should use the scan tool to gather information for General Motors Technical Assistance Center. Technician will need to bring the engine to 214 Fahrenheit or 100 Celsius. After the engine is up to temperature the oil pressure at idle should be recorded. Then run the engine at 1100 revolutions per minute for 45 seconds and record the oil pressure. Then run the engine at 3500 revolutions per minute for 45 seconds and record the oil pressure. Technician will now need to run the engine at 1400 revolutions per minute using Global Diagnostic System 2 command the oil control valve on and off 10 times on the 11th time record the reading on and off. Technician will now need to run the engine at 2500 revolutions per minute using Global Diagnostic System 2 command the oil control valve on and off 10 times on the 11th time record the reading on and off. Also record if any repairs were made previously for this concern. Technician will now call General Motors Technical Assistance Center with the findings of the test.

仅当厂商、通报编号、发布日期和完整摘要一致时，重复登记才会合并展示，原始编号仍予保留。旧资料继续供查阅；确认明确替代关系后才标示后续版本。1994 年以前的车辆关联与默认结果分开显示；未注明年款不等于适用于所有年款。