FIAT

08-010-16

2016-01-28 · NHTSA 10121931

车型关联可作为查阅线索；具体发动机、生产范围和软件条件请核对厂商资料。

厂商摘要

以下为英文原文

Flash: Diagnostic And System Improvements This bulletin involves updating the Body Control Module (BCM), Powertrain Control Module (PCM), Transmission Control Module (TCM) with the latest available software. All three modules must be updated in this service action. Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs): · P0711 - Transmission Fluid Temperature Sensor A Circuit Range-Performance. · P1CC9 - Unable to Engage Gear. · P1D98 - Incorrect Gear Ratio Clutch B or D Defective. · P1DAD - Input Shaft-Output Shaft Direction Correlation. · U1424 - Implausible Engine Torque Signal Received. In addition, the customer may also experience one or more of the following transmission related conditions: · Garage Shifts (Shifting from Park or Neutral into Drive or Reverse). · Harsh 1-2 upshifts. · Less than desired accelerator pedal response in Sport and Traction Plus modes. · RPM flare at engine start. · Less than desired idle performance when shifting into DRIVE or REVERSE following a cold start. The following enhancements are included in the software update: · Vehicle performance enhancements. · Improve transmission shift enhancements for sand and snow mode. · Improved paddle shifter operation. Body Control Module (BCM) A customer may describe that the remote key is not recognized and doesn't open/close door locks. In some cases the engine may not start due to the fact that a valid key is not recognized. Upon further investigation the technician may find the Diagnostic Trouble Codes (DTCs): · B105A-64 - Doors Lock All-Signal Plausibility Failure. · B105D-64 - Doors Deadlock Or Unlock Driver-Signal Plausibility Failure.

仅当厂商、通报编号、发布日期和完整摘要一致时，重复登记才会合并展示，原始编号仍予保留。旧资料继续供查阅；确认明确替代关系后才标示后续版本。1994 年以前的车辆关联与默认结果分开显示；未注明年款不等于适用于所有年款。