查看

FCA

68070702

2015-07-17 · NHTSA 10149733

车型关联可作为查阅线索;具体发动机、生产范围和软件条件请核对厂商资料。

厂商摘要

以下为英文原文

O2 Sensor If your dealership is located within 1-2 hours of Metro Detroit, please contact Nadeem Akhtar at cell (734) 417-7332 before replacing this part, as engineering would like to evaluate vehicles with this issue.~ If no response is received within 15 minutes, then continue with repair.~ In all other cases, before replacing this part due to a P0141 fault code, please perform the normal diagnostic routine for this Diagnostic Trouble Code.~ If there is no trouble found, and the fault is stored, DO NOT replace the O2 Sensor, instead, perform the following procedure:~ 1. Clear the P0141 fault.~ 2. Soak the car for over 6 hours.~ 3. Turn the key to the ?on? position for 3 seconds (Do NOT crank the engine).~ 4. Turn the key directly to ?crank?.~ 5. Test drive the vehicle for two separate 6-minute drive cycles with a ?key-off? in between drive cycles.

NHTSA 厂商通报资料 ↗

仅当厂商、通报编号、发布日期和完整摘要一致时,重复登记才会合并展示,原始编号仍予保留。旧资料继续供查阅;确认明确替代关系后才标示后续版本。1994 年以前的车辆关联与默认结果分开显示;未注明年款不等于适用于所有年款。