JEEP

18-078-20

2020-09-04 · NHTSA 10181598

车型关联可作为查阅线索；具体发动机、生产范围和软件条件请核对厂商资料。

厂商摘要

以下为英文原文

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following DTCs have been set:DTC P1DD2 will be stored in the Transmission Control Module (TCM) however no DTCs will be stored in the PCM. Verify no unrelated codes are stored in the PCM before flashing. If codes are stored in the PCM, normal diagnosis should be performed.B25C9 - Driver Door Ajar Switch 2 Stuck Closed. P061A - Level 2 Torque Performance. P06E9 - Engine Starter Performance(North America Only). C050D - Wheel Speed Signal Left Rear Rationality. C0501 - Wheel Speed Signal Left Front Rationality. C0507 - Wheel Speed Signal Right Front Rationality. C0513 - Wheel Speed Signal Right Rear Rationality. P1DD2 - Torque Request Signal From TCM Denied will be present, set by the TCM and the vehicle will be in limp home mode(Sales Codes DF5 and DF7 - Automatic Transmission Vehicles Only). U1428 - Inaccurate Engine Torque Received(Sales Codes DF5 and DF7 Only). Customers may also comment on one of the following:Poor shift quality. Lack of vehicle speed. Vehicle will intermittently not start(South Korea Only). The vehicle is in limp home mode (shift RPMs are limited) with no DTCs set(Sales Code DE1 - Manual Transmission Vehicles Only).

仅当厂商、通报编号、发布日期和完整摘要一致时，重复登记才会合并展示，原始编号仍予保留。旧资料继续供查阅；确认明确替代关系后才标示后续版本。1994 年以前的车辆关联与默认结果分开显示；未注明年款不等于适用于所有年款。