FORD

SSM 49844

2021-06-02 · NHTSA 10198602

车型关联可作为查阅线索；具体发动机、生产范围和软件条件请核对厂商资料。

厂商摘要

以下为英文原文

Some 2016 F-Super Duty/F-650/F-750 vehicles equipped with a 6.7L engine built on or before 15-Feb-2016 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P054F stored in the powertrain control module (PCM). This may be caused by the torque converter one way clutch. To correct the condition, perform the torque converter stall speed test. Refer to Workshop Manual (WSM) Section 307-01B > Special Testing Procedures > Stall Speed Test. For this specific condition, the line pressure test is not required prior to performing the stall speed test. If engine stall speed does not reach the minimum RPM range specified, replace the torque converter, torque convertor hub seal, and fluid filter. Perform the transmission fluid cooler backflushing and cleaning procedure and refill the fluid. Refer to WSM, Section 307-01B.

仅当厂商、通报编号、发布日期和完整摘要一致时，重复登记才会合并展示，原始编号仍予保留。旧资料继续供查阅；确认明确替代关系后才标示后续版本。1994 年以前的车辆关联与默认结果分开显示；未注明年款不等于适用于所有年款。