JEEP

0807819

2019-11-05 · NHTSA 10220080

车型关联可作为查阅线索；具体发动机、生产范围和软件条件请核对厂商资料。

厂商摘要

以下为英文原文

Flash: Body Control Module (BCM) Updates This bulletin involves reprogramming the Body Control Module (BCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, a technician may find the following DTC have been set:B25C9 - Driver Door Ajar Switch 2 Stuck Closed (Module, Powertrain Control (PCM)). Stored DTC only, this update is not for active fault.If B25C9 is an active fault normal diagnostic must be performed. This software update will not correct active DTC (2019 - 2020 years only). Customer may experience one or more of the following:The engine fails to start and requires a key cycle to restart the engine and the ignition must be cycled off without the brake applied in order to restart successfully with the brake applied. The siren might trigger randomly when the vehicle is armed and the engine is ?OFF?. Automatic close windows (comfort close windows) when the door's lock is activated after the ignition is ?OFF? and they open/close one door; sometimes windows may stay opened. The siren may be too loud when locking and unlocking the vehicle. The fuel gauge may fluctuate at ignition on, engine off. Increased horn delay when pressing the horn pad. After a key fob lock command the vehicle alarm triggers inadvertently.

仅当厂商、通报编号、发布日期和完整摘要一致时，重复登记才会合并展示，原始编号仍予保留。旧资料继续供查阅；确认明确替代关系后才标示后续版本。1994 年以前的车辆关联与默认结果分开显示；未注明年款不等于适用于所有年款。