FORD

SSM 51359

2023-02-14 · NHTSA 10232421

车型关联可作为查阅线索；具体发动机、生产范围和软件条件请核对厂商资料。

厂商摘要

以下为英文原文

Some 2023 Bronco vehicles equipped with 2.7L engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P04DB stored in the powertrain control module (PCM). This may be due to a fault detected while in transport mode or a leak in the positive crankcase ventilation system (PCV). To correct the condition, perform a visual inspection of all possible sources outlined in Workshop Manual (WSM), Section 303-08B pinpoint test (PPT) HG. Deactivate transport mode and place into normal operation mode, refer to WSM, Section 419-10. Clear all DTCs, allow the vehicle to sit with key off for at least 2 hours or until engine coolant temperature (ECT) is below 45°C (113°F). Start the vehicle and allow it to idle in park (P) for at least 1 minute. Using the appropriate scan tool, check for DTCs. If DTC P04DB returns, perform PPT HG in the WSM.

仅当厂商、通报编号、发布日期和完整摘要一致时，重复登记才会合并展示，原始编号仍予保留。旧资料继续供查阅；确认明确替代关系后才标示后续版本。1994 年以前的车辆关联与默认结果分开显示；未注明年款不等于适用于所有年款。