JEEP

18-001-24 REV. C

2024-09-07 · NHTSA 11007658

车型关联可作为查阅线索；具体发动机、生产范围和软件条件请核对厂商资料。

厂商摘要

以下为英文原文

"Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician must find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ● **P0629 - Fuel Pump Control Circuit High. ● P0171 - Fuel system Lean. ● P0087 - Fuel Rail Pressure Too Low - Bank 1.** ● P16F0-00 - SPI Comm Hardware Fault. Customers may also experience one or more of the following: ● **The rear half shafts are damaged due to pressing the accelerator in drive with the Electric Parking Brake (EPB) applied. ● The Oxygen Sensor (02) can give wrong values when entering EV mode, triggering a false MIL. ● The Instrument Cluster Panel (ICP) unable to calculate the instantaneous fuel economy under heavy acceleration. ● Variable Speed Fuel Pump inoperative after refueling (no start).** ● Intelligent sign recognition is not working properly causing degradation in active speed limiting functionality (IAP Only). ● Shifts rough occasionally when coming down to a stop. ● Shifts rough occasionally when accelerating. ● Shifts rough when transitioning from EV to Hybrid operation on low SoC. ● Shifts rough when engines starts. ● On part throttle accelerations with little to no battery available the transition from battery power to engine on is harsh and abrupt. ● The engine oil life on dashboard drops down too fast when the engine oil dilution reaches high level without the ability to recover. This bulletin involves reprogramming the PCM, Transmission Control Module (TCM) and the Auxiliary Hybrid Control Processor (AHCP) also known as Power Inverter Module (PIM), with the latest available software."

仅当厂商、通报编号、发布日期和完整摘要一致时，重复登记才会合并展示，原始编号仍予保留。旧资料继续供查阅；确认明确替代关系后才标示后续版本。1994 年以前的车辆关联与默认结果分开显示；未注明年款不等于适用于所有年款。