查看

JEEP

9100620

2025-07-01 · NHTSA 11020602

车型关联可作为查阅线索;具体发动机、生产范围和软件条件请核对厂商资料。

厂商摘要

以下为英文原文

MP EPB SERVICE BRAKE MESSAGE ON THE CLUSTER AND LED LIGHT ON If any of the following DTCs come as ACTIVE: C10ED-00 Electronic Park Brake Switch LED- C10CD-01 Electronic Park Brake Switch-General Electrical Failure 1. Confirm customer's concern 2. If the DTCs come as STORED, clear them prior to performing any service steps. If the DTCs come as ACTIVE 3. Check that the battery connectors are properly seated as well as the ground connector. 4. Try disconnecting the battery for 5min to reset the module. 5. If the issue with the EPB is still present and there are ACTIVE DTCs, check for any loose connection at the Park Brake Switch or Brake System Module BEFORE replacing the Switch. If after disconnecting the switch and the module, any DTC goes from ACTIVE to STORE, clear them and do not replace the switch. 6. If after following steps 1 to 5 the Park brake switch is not working, replace the switch. Note: If there is any other DTC are present, review Brake System Module BEFORE replacing the switch. C10EA-00 Left Park Brake Actuator- C10EC-00 Park Brak Actuator Correlation C10EB-00-RIGHT PARK BRAKE ACTUATOR

NHTSA 厂商通报资料 ↗

仅当厂商、通报编号、发布日期和完整摘要一致时,重复登记才会合并展示,原始编号仍予保留。旧资料继续供查阅;确认明确替代关系后才标示后续版本。1994 年以前的车辆关联与默认结果分开显示;未注明年款不等于适用于所有年款。