MERCEDES-BENZ, MERCEDES-MAYBACH

LI47.70-P-078563

2025-07-31 · NHTSA 11021147

车型关联可作为查阅线索；具体发动机、生产范围和软件条件请核对厂商资料。

厂商摘要

以下为英文原文

Complaint - Engine diagnosis indicator lamp (MIL) lights up. - Current and saved fault code in DCCU and powertrain control unit (PTCU): P2E9873 The position sensor of the external socket flap of the vehicle socket (direct current) indicates an electrical fault. The actuator does not open. - The vehicle starts or charges normally and without any problems. Cause Software in the control unit "N116/5 - DC charge-connection unit (DCCU)". Remedy For model series 167, 254 (Only for USA): • Remedy is available: • Update software for N116/5 (DC charging control unit box) and perform SCN coding of N116/5. • Once the SCN coding has been updated, the engine diagnosis indicator lamp (MIL) is no longer actuated with this fault code. For Model Series 214: • Ensure N116/5 DCDC has latest software. • Perform SCN coding of the PTCU controller. • If MIL is still active, please open TIPS case and send to Body/Chassis/Entertainment inbox. For other model series: • Work on the SW remedy for N116/5 (DC charging control unit box) is in progress. • Once the software is available, update the software for N116/5 and perform SCN coding of N116/5. • If this problem occurs, the vehicle start or charging functions are normally not affected; therefore do not replace any parts. • Replacing parts does not solve this problem.

仅当厂商、通报编号、发布日期和完整摘要一致时，重复登记才会合并展示，原始编号仍予保留。旧资料继续供查阅；确认明确替代关系后才标示后续版本。1994 年以前的车辆关联与默认结果分开显示；未注明年款不等于适用于所有年款。